Separate names with a comma.
Some features disabled for guests. Register Today.
Up to 24v 5A Switched Output for Coolant or LED devices from the spec list Cheers Gary
Don't run the stock cable through the chain with the other cables. Too much EMI Cheers Gary
Hi Charles, Not sure I understand your question? can you link the listing or screenshot? The backbox comes with a connector, you need more? Relay...
For flexibility in setup, can be operated in pull up + or down - for control.. for example by default Arduinos digital control "pull to ground" so...
Using the GRBL post processor? Gary
This is the design I'm still using.. fixed z is the way! Cheers Gary
There will always be the issue when the shoe is off the edge and lets chips fly in that direction (I think that is what you are talking about?)....
While I agree in theory, mine has worked flawlessly for years now, as has many others. Use at your own risk however, some of the cheap ones are...
Also check the collars that constrain the lead screws
Hi John, could be a chipped endmill, or aluminum welded on to it (can be scrapped off usually)? which spindle are you using? is it one of those dc...
Could it be your brush vac brushes smashing down on the work surface causing too much drag? IMO best dust boot is fixed z height so you set it to...
No, same ground but don't power everything from same power belt or power strip, and use a filtering strip for the control power. Also can check...
"it is in the same vfd belt and I have no grounding but I have a separate one-meter cable stuck in the ground to the cnc and everything is...
Is everything connected to the same power strip I see in the video? you can get filtered power strip, and separate the vfd from the other things....
With ER's you have to loosen and then unscrew about 2 more turns to release
Sounds like EMI for sure, the instruction are intended for router use, plasma cutting is far worse with EMI. Earth grounding the motors and frame,...
Big heavy spindle maybe getting out of control on the way down? Try lowering your max travel speed and acceleration. Try air cuts while trying to...
Check your motor coil pairs. Anything written on the brake? model number voltage spec anything? Gary
Typically any motor brake is spring loaded and is "on" when the power is off, this is just to stop the z from falling when the motors are off....
Check your wiring and verify your coils are wired to the BB correctly, use a meter (resistance) or the short method to find the coil pairs, using...
