Separate names with a comma.
Some features disabled for guests. Register Today.
Is the 24v plugged in and powered up? the fan runs on the 24v power. Gary
Check 0-10v settings in grbl? Regards Gary
Check those motor couplers. Could be an intermittent wire connection causing lost steps. Gary
Maybe a windows update changed your keyboard repeat or delay settings, can check that and try some different settings. Gary
There is a YouTube video on how to do it. Link on the Estlcam site Gary
classic wiring issue symptom, check your coils with a meter don't rely on the sheet. Docs troubleshooting section Gary
Another option, Estlcam supports STL with no conversion, and has grbl post for cam or can run Arduino type machine directly. Cheers Gary
I would draw it in Tinkercad export as STL and use the 3d STL option on Estlcam, would need a small ball end bit to carve it. Gary
No problem Tres, sometimes it's nice having an easy question I can answer! Gary
Those are the plugs, pull them out. Gary
I make a lot of small holes for projects in plastic, wood, aluminum and G10, they are always undersize, it's a combo of flex and backlash. I...
April just put out a video showing some jigs they use for production, it's a good watch [MEDIA]
Is it moving smoothly a few inches or noisy and jerky? if the later you have a wiring issue still, sounds like it from the current light being on...
For the Y issue, swap one of the wire pairs around to reverse that motor, so if it's like green-red, yellow-black, making it green-red,...
" sounded like they were working"? you mean vibration and noise, but no controlled movement? make sure to verify your motor coil pairs. copy...
When you click the port box do you get a drop down?
These look so surreal, I need to play with this, thanks for sharing!
Also.. the ER nuts are cheap and you should buy enough to live with your most used collet sizes. saves time Cheers Gary
normal
1) Unless there is some weird way to have both Y motors facing the same way then you would wire them just like the belt drive. 2) I wouldn't...
