Separate names with a comma.
Some features disabled for guests. Register Today.
Everything I've seen shows a big improvement, would need to keep optimizing for best results with your system and material. Regards Gary
Yes for sure, it blows the off-gass and smoke out of the way letting you cut faster and with less diffusion of the light. Quick google search...
Air stream for sure!
Hi Rob, what's the speed set to for that Y move? are you using the default machine settings? Please post your settings. Check and recheck your...
Yes the extension wire is broken most likely, not the motor, wires break after years of flex Cheers Gary
99% of the time that is a single broken wire (or pinched on the insulation at the connector) out of the 4 on the motor connection. Could try some...
A two flute cutter will be stronger than a single flute most of the time, save the single flute for plastics and aluminum. Also, use the biggest...
have to be willing to wait a month [ATTACH]
LOL then I found it https://www.amazon.com/dp/B08TZP438K/ref=twister_B08V1LKQRW?_encoding=UTF8&th=1
10mm bore is an odd size, is that a motor shaft? Powge seller on ebay is one of the best I've found and they don't have that. mcmaster carr...
Like Peter said could be wiring for sure, but to break in the nut block you can chuck the lead screw in a drill and run the block up and down the...
If you are going to cut these I would recommend looking for the Ox Heavy duty, which uses the much better c-beam x gantry and z instead of the...
If your acceleration is very low you can have issue with this as well, every little segment it will slow down and never get up to speed. Just...
NO or NC doesn't matter too much, can invert the inputs, as long as NPN, I think most people run NC. Cheers
The first pic above isn't backlash that's a whole bunch of missed steps, in other words the motor stalled out. Is this with a Blackbox? big...
To add do the confusion, when changing direction I've only ever swapped one coil, like 1234 to 2134 maybe Peter has a reason for swapping both? Gary
Sheared? the bolts broke? or you mean you stripped the head out? aka the 3mm tool just spins.. if it's stripping then you can use a standard head...
Which UGS are you using? I just looked at my "UGS-Platform" and I only had 0.00, I cant see a way to change it either. 0.001" precision is...
You can 3d carve an stl file. I use Estlcam but I'm sure other ways are available. Cheers
I find grounding is often overlooked but good grounding of everything helps a bunch. And as Shell said get the spindle power away from the rest,...
