Separate names with a comma.
Some features disabled for guests. Register Today.
I like Fusion360, it's very good, I recently switched to DesignSpark mechanical, really like it, perfect for 3d printing.
That is not loud at all!! normal stepper sound Cutting.. now that is LOUD
dry lube helps, make sure your anti-backlash nuts are not tight.. should just have the play taken out with the screw. When you are running a job...
Also get a set of the nuts, this way you can properly click the nuts onto the collets and keep them together, saves time and aggravation... and...
Hi Joe, the calibration involves changing the GRBL settings which are saved in the BlackBox. Cheers Gary
very cool, is there a way to do a purge tower?
I think what Peter is saying is, must have moved the machine accidently in X when doing the bit change. Or you have a loose drive motor/screw...
I had this exact thing happen once it was a bad connection on one of the wires for the z-motor caused intermittent lost or gained steps. Can also...
Which dust shoe are you using? You can put the bit in as far as practical to reduce leverage (not clamping on the flutes). Pic would help....
If you have continuity between a motor frame and any of the motor wires then that's your issue. Should be insulated. Grounding the frames is a...
Best thing for a belt machine is to dual belt them, makes a huge difference, I haven't had to touch my belts in 2 years. [MEDIA] I didn't use...
I have no idea about the quality of that spindle but the size is perfect for these machines IMO. Are you getting many hours out of your routers...
It will be $1000+ cheaper to get a printer like the XL cr-10 and put an enclosure over it. here is a list of large printers under $1000 Gary
Sorry about that, I updated the link its just the build video, yes the ones in Red, make sure that vertical C-beam is square first then adjust...
Hi Shotfun, can't you simply loosen your x gantry carriage plate at the black angle corner connectors and square as needed? [MEDIA] at about...
Hi Dax, Overkill for that machine probably, but if you got it already then go for it, wont hurt! Cheers Gary
Also setting your speeds or acceleration too high can cause this. Check all the wiring for sure, but also try lower speed and acceleration. Post...
"the router only stops when the dust collection hose is up against the router" Maybe have some power issue, how are you powering/controlling the...
Justin, go to the parts store support Cheers Gary
I hardly ever (almost never) home my machine.. Set the work zero and go, I only worry about it when doing larger projects with expensive material....
