Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Kasper, Is your flex coupler set-screw tight onto the flat of the motor shaft? Gary
Hi Dave get yourself some blue loctite. Any hardware or auto parts store will have it. Cheers Gary
I really like Greenshot, hit print screen and you get a snip tool and can copy for pasting or save to a file. Lets you select only what you want...
Sounds like you need to invert your home switch logic? $5 z home should be up. Do you have capacitors installed to suppress false limit...
Right, he was replying to my question if he had reverted back to grbl. I’ve done this successfully (just had to try the restore function in...
The 500mm and the speed for home seek is much too high 8000mm/min and your max speed is 500 so might be a bug? Set your, seek speed to 500 and...
Sounds very much like EMI noise from the router. Move your router power wires away from the USB cable and anything else connected to the arduino....
Ajkelsey, Not clear, so you did restore? If you can see your GRBL settings than it should be restored correctly. Post your GRBL settings here....
Not with OB control, Backlash comp is very tricky to implement and get reliable results. I would recommend determining the cause of your...
good find! What I do is place on hard flat work table, place small block of wood on top and press down with hands hard. cheers Gary
You should be able to tighten the bolts all the way, if you can not then the wheels are missing a washer in between the bearings, or the bearings...
Did you watch this video from ThePaintballGuy? His settings are in the description, your settings look close to his [MEDIA] Also I've read that...
I have seen this with wheels that are set too tight, does the carriage move smoothly and easily with the belt removed? Can you (with some thumb...
Dlh, acceleration is setting $120, 121, 122 (x,y,z) the default is a conservative starting point. For example on my ox I have it set for about...
Personally I drill mine out for M5 Gary
Yes, will not be a problem, the driver will current regulate, higher voltage gets you more speed potential. Cheers Gary
Hi Mari, post your cnc file so we can take a look, could be a post processor issue. Gary
Hi Dlhoulton, Your plunge rates can be double, your feed could be higher as well with such small step-overs. What is your acceleration set in...
