Separate names with a comma.
Some features disabled for guests. Register Today.
I've done this with ESTLcam with success, made the file using tinkercad, and Estlcam lets you set max cut depth and roughing and finish passes. I...
Campbellcastle, Replace your lock-nuts or use some blue Loctite. Also, make sure your flex couplers are good, sometimes they are loose or not set...
Check out the Openbuilds Cam before you buy anything.. I've been using ESTLcam, it's free to try and cheap to buy, for a year or so now and have...
Hi Baum, follow the driver install steps as listed in section 4 of "the docs" you might not have the driver installed correctly. cheers Gary
Rack and Pinion! Cheers Gary
I would also recheck all motor wiring, if you had issues with the Z maybe more issues, but not as bad to cause it not to "work". Cheers Gary
It should, is your steps per mm set correctly? Cheers Gary
Yes, the z axis noise, failure to move reliable and home failing is all related. Gary
Hi Brrian, Increase your soft limits ("x,y,z Max Travel" setting $130 - $132) or turn them off ($20=0) :) Cheers Gary
Hi Bigbridge, The Z axis issues sound like either a wire is loose or incorrectly paired coils.. or you just need to increase the current on that...
Might need to set your Beat me too it! Set home pull off ($27) larger than 2mm, try 5mm. Cheers Gary
Yes, typically you would connect all on the cables (only one end) to the same common earth ground. For example I have my chassis of my PSU earth...
Hi Joseph, you can see at the bottom of most product pages there is a CAD link. Cheers Gary
Hi Kristopher, please check the Docs section 4 drivers and software. On your win10 machine Check under device manager for the usb device, and make...
Hi Keith, make sure you are wired signal to ground, not ground to 5v. Cheers Gary [ATTACH]
Correct, the BlackBox is a controller (Running GRBL) and drivers in one compact package. Gary
Right on!
Ok, watching his second video on control, it's funny he's using a GRBL arbuino to talk to a parallel control board.. could have just use a $16...
Hi THR, It's an ok kit, maybe a bit pricey, and the controller is an unknown as for quality, The drivers are $20 each if gotten from ebay On the...
There are times when the "tolerance" of all the parts involved, wheels, plates, and V-slot work against you. Making the holes accept an eccentric...
