Separate names with a comma.
Some features disabled for guests. Register Today.
Made everything half size? was this SVG import? need to play with DPI setting to get the scale right. Otherwise if using the Estlcam control could...
To use Estlcam control you have to "Program Controller", when you do this use the Xpro presets. Cheers Gary [ATTACH]
Hi Charlie, Yes treat it as an XPro and no problem. I ran mine stock GRBL for a while then recently switched to Estlcam firmware/control, mostly...
Hi Charles, Not sure what Heretically is? but it's usually wiring (polls not properly identified or a loose wire) or current potentiometer needs...
Keep going! ;) Cheers
Hi Don, Turn it up past 50! something like 500 even, experiment with what works best for you. Personally I have something like 600 on Y and Y and...
Just posted in my builds section. BTW if you have a standard OX with 2060 gantry v-slots this wont work! Cheers Gary
Here is my take (DXF file under "files and drawings") on the Overbuilds "OX" X and Z plates, feel free to use or modify. Build and use at your own...
Gary Caruso published a new build: Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick...
Hi Manny, Not without modification, the Workbee uses custom gantry plates where as the Lead uses maker plates and vertical extrusions at the ends...
Sure I could post them, will need some time to clean up the file and I'll post. Cheers Gary
Basically this is what a dual belt setup is. Martin Barfoed has great videos on the subject. [MEDIA] Cheers Gary
With soft-start and speed control electronics I would be surprised if there is much inrush start current, but with the price of a 500+ watt psu...
Much cheaper to go with ac isn't it? not really seeing an advantage, unless you already have it. Cheers Gary
Right, bigger motors than Openbuilds Big / little motors ;)
Right! I'll edit my response Gary
How do you mean? when you tighten the bolts the wheels won't spin free? Did you forget the washer in between the bearings? if the eccentric cant...
Hi Craig, It comes down to current and voltage. If you want to use higher torque - bigger motors, you need more current than something like a...
Yes, it works. Wire in Parallel. Set the current to the sum of all motors on the channel. Cheers Gary
You can glue HDPE with CA glue if you flame treat the surface first. Wave a blowtorch flame over the surface, just fast enough to not melt it,...
