Separate names with a comma.
Some features disabled for guests. Register Today.
Like Alex I didn’t bother for the longest time, close enough with a square resting on the spoil board and sighting the spindle body gets you close...
I agree, start tramming! Cheers
Hi XelNaha, Something does look loose, maybe your collars on your z are not tight or your getting screw flex in compression on the longer axis?...
Don't hit them with anything.. press them together with two flat surfaces, like a table and a small plywood board. Some can take a bit of force to...
I've used Tinkercad to make 3d STL files, which Estlcam can make cam with, worked out well, takes some practice and fiddling but doable. Tinkercad...
Another option is Valuehobby.com they sell some of my rc airplane designs... I'm using the 269ozinch motors from there no issues (out of stock on...
You can also go direct with steppers online, not sure if the shipping makes up for the amazon price.
David, You talking about this one? Up to 24v 5A switched output for coolant devices such as 24v DC pumps, solenoids, contactors, or Solid State...
Jeff, When calibrated for 8" how far off is 2"? Gary
Hi Jeff, so after calibration you are off by a mm? not sure what you are saying in your description. Can you post your $$ grbl settings? could be...
Hi Armadillo, As long as "yellow and green" is a coil and "blue and red" is a coil you will be fine, A or B doesn't matter. To change the motor...
Hi Steve, the pot adjustment changes the current not the voltage, just turn them down until you can do a run without getting to hot. Gary
D3 and ground should work (pin-outs pic here), what software are you using? most have a section to observe input status for testing. Another thing...
Same! [ATTACH]
Direct Drive, no it will not hold well enough, but with sufficient mechanical advantage from a gear or belt reduction you will. If you google...
Yes with an arduino you can run any size stepper you want, as long as the driver can provide enough current! voltage = speed, current = torque...
Which exact drivers do you have? Most m335’s I see are 24v max? A4988 are typically underwhelming, have you increased the current with the pot on...
Yep, need more power, what stepper drivers are you using? What size nema23 and what screw pitch? Cheers Gary
250k is big? I have some tested and working 21MB trochoidal path files you can test things on if you like :)
I've seen laser raster projects using GRBL.. there are laser settings, and raster is no problem. 3D carving and high speed "adaptive" type cutting...
