Separate names with a comma.
Some features disabled for guests. Register Today.
Hello so toady i was doing a nesting work.496x650mm into smaller parts from 180 to 220mm. Than i noticed that some parts are 2-3mm smaller!!So i...
So iam done with reflashing the bootloader.After that the Blackbox flash was succesfull.Thanks for the help!
Just checked the cables,looks good to me.
Oh i see,my bad.
By the way,maybe this is my problem? docs:interface:flash-run-jumper [OpenBuilds Documentation] i did not move the jumper to flash mode?
Thank you so much!
Sir,is there any tutorial how to reflash the bootloader.Thanks.
The usb was not unpluged during the flash.
I keep getting the FLASH FAILED error.I tried it at least 10 times.It was working perfectly til i tried to flash the controllet to 2axis machine...
When i tried to flash i got the error msg Flashing error or something like that. But now i cant connect the usb to the controller.Cant make a...
Thansk sir,i will take a try.
Hello,i would like to use limit switch only on two axes X,Y.Is there a way to use two of them?Am using the black box controller.Thanks.
Yesterday i was checking out the methods of holding down your material on the cnc bed.I came across with the aluminium t slot method.I was...
My Z0 is on the top of the material,and no,i did not surfaced the material...Tomorow i wil surface the top and then i will make a test drill holes...
I measured out everything.Spindle tramed.Spoilboard surfaced looks good.But the single line millingtest... the depth is still off.
[MEDIA] I checked everything,i found out the machine was a little bit off,but now is square.The x profile in now flat, and not twisted anymore as...
By the way,if i mill a 50x50 square the actual x/y lenght of the square is correct,so i think the y profile is little bit lower one side and its...
Thankyou alot sir,i will check everything i can!
Today i checked out the x axis profile and its not looking so straight.Also as you can see in my older post,the milling gets deeper on the right...
Something is not clear for me,if the x rail is bending while the machine is working than how is my spoilboard flat after surfacing.I mean if there...
