Separate names with a comma.
Some features disabled for guests. Register Today.
that would make too much sense ;)
Hi Kevin, You asked about using the two motors on the X axis, I think you mean the Y? the Y is front to back the X is side to side... Anyway you...
You can always install win10 and never enter a key, it will ask for a key forever but will work fine.. also you can buy a key on eBay for cheap....
Hi Marc, the motor you listed has a nice low inductance.. and would do fine on 24 Volts ( assume you mean Volts not "36w") but when using external...
:), yes Estlcam is my favorite, I think I've become its biggest cheerleader here. You have two options with Estlcam.. 1) Draw your file using the...
Let me look... I'm sure somebody has a minute to talk? I think I see Mark in the far corner over there...? I think this is the live feed of the...
Hi Marc, It's the same just use the screw terminals which make it even easier. Not sure why you bought an XPro when Arduino does the same thing?...
The counter bore for the heads helps with clearance in some builds and the hex on the other side helps retain nuts which makes installation easy...
I just tried your file in Estlcam, with one issue, i had to draw a border around the part to end the pocket functions.. but otherwise was easy to...
Hi GST, could try turning down the current on all the drives just to see if you can get them working. can you measure the output voltage of the...
I'm surprised nobody corrected me on this, I was thinking more about it and the $5=1 will just decide NO (=0)vs NC (=1) operation, you still want...
Can be tricky making sure everything is on one plane and not 3D.. I use draftsight and it's basicly Autocad 2D and works great for making DXF for...
Sorry Yes you are correct, I think i was looking at an old GRBL settings list, $5=1
This video should help, if you stick with the pnp you can invert the input function.. $6=1 (Edit!! should be $5=1 for home pins) in grbl...
Hi Seamus, do you have the spec sheet for the ones you have? thanks Gary
Should work great, would love to see it! Two issues Have you found a supplier with longer leads? all I can find are 2mm lead screws, this would...
This is from the xpro wiki guide... There are two motors sold on openbuilds, a standard nema23 and a high torque. You want to set the current...
Troy, great looking machine! I really like how simple and clean the design is, looks like it performs great! Cheers Gary
Ok Shane, the trim pots on the Xpro is where you need to adjust the current. When the current is set you will be surprised how strong these motors...
Yes the weird stutters noise is the motors stalling and loosing steps, did you try increasing your current?
