Separate names with a comma.
Some features disabled for guests. Register Today.
I use 1/8" center drill bits for holes that must be 1/8" they are cheap and work well, something like these, I can't find the ones I have, but...
Hi Aaron, You can always adjust the current (with the dip switches) after you try a couple practice runs to see how warm/hot the motors get, they...
Cool demo I wish he would have demonstrated connecting both ends.. I think he didn't because it would not have made a ground loop. Ground loops...
Probably have to swap the end plates around so the bearing recess is on the other side.. But I agree anything over 250mm should be setup in...
Hi Benny, If a motor is going the wrong way just swap one of the two motors coils wires around. it's not the limit switches, your machine doesn't...
Sounds like a good plan, I keep forgetting that you are using Mega and I'm not sure many people are, could very well be a Mega2560 GRBL bug....
Just set the "cut Depth" for the desired spring force. Calibrate using a scale and see how many mm of down movement you need to achieve 15lbs of...
Personally, I would build something like the cnc router parts machine. You need more than a 4080 or c-beam for 48" gantry travel, things get...
Hi Rebel, The lowrider uses nema 17, you would have to "upgrade" every part to get something you will be happy with IMO. Impressive engineering,...
A spring would make the pressure part easy.
Exwhyzee, that is odd that Z would home backwards from where it should when you have $3 as 3...Should be no reason to swap a coil when $3 does the...
Interesting you have your Home $23 direction set to 7 which should make the Z go down instead of up when homing.. all inverted I would think you...
Oh boy! yes, there are many differences from what I can see. [ATTACH]
It's been a while since I used UGS, but yes that looks like it's seeing the switch. You could always try Estlcam, flash the firmware, its easy to...
Hi ExWhyZee, Yes $23 sets the home move direction, you can put it anywhere you want. Make sure the machine is set up correctly, where X is left...
Kelvin, might need to calibrate your input. What’s the make/model of your vfd? Gary
I'm thinking the same thing, already have the track, it's the door slides, so you just need a pulley and motor at one end and an idler pulley...
Thanks, some day I’ll have this all figured out, but getting there, little by little. 3.3mm for the trochoidal and finish passes, so two passes on...
Yes, Estlcam No lube Spiral up cut $5 link provided Climb cutting and 300mm/min, 5% finish cut (5% of dia finish pass) I did one today at...
I tried a standard two flute today and with a finish pass, really happy with the results, this was still torchoidal, then a 300mm/min 2.2mm doc...
