Separate names with a comma.
Some features disabled for guests. Register Today.
Glad I could help!
Hi MTGAwesome! There is another thread with a 1500x3000 ox going on right now, that would be like what you are wanting to do. If it was me I would...
Hi Props, Make sure to do the dip switching with the power off, or at least power cycle the driver (power off for a few seconds for caps to...
That's why, unfortunately many slight differences between suppliers. Cheers Gary
Hi Anthony, Is this with the tension screw completely loose? Is this with it bolted in place? Sometimes the two bolts holding it in place to the...
IanC, Yes I got mine from Openbuilds because the support is great. While you technical could run 2 of those motors from one driver, it's frowned...
Gota have it! Knees don't hurt after, lol
Hi IanC, The PSU is good, I would go with the discrete 542 drivers, will be more power headroom and reliable. You probably have a Arduino Uno? to...
Is that with a TR8*8 screw? With a TR8*8 the lead is 8mm (8mm travel per turn) at no micro-step it would be 200/8 = 25 steps per inch 1/4 = 100...
On 1/8th you would have 200steps per mm
What do you have your micro-step set to on your drivers?
Yes, I don’t know if anybody has dual belted GT2.
Yes, like $18 for a real one on amazon, I know some use an Arduino Nano and the a screw shield for that.. Arduino Uno most common.
Hi Ashish, Just get an Arduino and screw shield (makes wiring easy) and the four discrete drivers, who makes the DB542t? For software Estlcam...
Just watched your electronics setup, great job on the video.. Couple tips; Micro-steps - don't use the max, you only want to use the most that you...
Hi Spider, Dual belts helps reduce (almost eliminate) belt stretch and tension issues. Eccentrics should stay the same when belting is done...
Great job on the video's, those spindle mounting blocks are very nice! subscribed
Draftsight is just like Autocad, even the keyboard commands are the same, plenty of YouTube tutorials, it's simple 2D drawing. Cheers Gary
Estlcam is great, if you want precise make DXF files on a cad program, a good free one is Draftsight :)
Ok, so it's only happening on one of the Y sides, take that belt off, maybe it is damaged.
