Separate names with a comma.
Some features disabled for guests. Register Today.
:thumbsup::)
the Z extensions are not helping with your stiffness, is that mdf peg board? Use shielded wire for your steppers and limit switches. I've never...
post your $$ settings and the gcode file so we can help, why do you want to go so slow?
I like it, can do it with something like this... i can't find any with TR8*8, this one is 10x10mm which would be good too Non-captive stepper
I think this will not save you much as i don't think it's the correct V slot 2040, so the wheels will not work, Openbuilds shipping is reasonable....
Nice, that's exactly what i want!
If you know Autocad... even 1984.. was that even R2 on floppy? I started with R10 on about 12 floppy disks! You can use Draftsight for free (it's...
I cut 12mm aluminum in 3 passes with Trechoidal milling, it's the only way on a belted machine.. i used a 3 flute 1/8" which would be useless for...
could be the current is set too high and it's shutting down the channel, and get a fan on the board, they need cooling.
yes, I could send you a simple g-code file and you can try to run it on ugs.. You are able to home, and jog and all that? i bet you have too long...
Estlcam has grbl post baked in, you just have to select it. There are videos on YouTube for using it, let me know if you need help setting it up....
Hi Johan, quick search i found this thread on the sheetcam site
Ok never mind then :)
disconnect "enable" maybe? Assuming the rest is connected correct. I think you need to power that breakout board with 5vdc? Or check that there is...
you need a GRBL post processor.. i don't know anything about Sheetcam, but i use Estlcam.com on DXF files, you can try it free
Most people file the end or use a tablesaw or a router jig to fully square up the end. I don't remember Openbuilds ever guaranteeing squareness or...
No problem Johannes, could like my posts I guess? Make sure to post some pics of your build and some projects! Thanks Gary
Hot is when you cant keep your hand on them, so the question is how hot? :)
Ok, i've never used cambam so you will have to find out how to move the origin in that.
It would be in the drawing or cam software you are using, you need to set the zero work coords position, so it starts in the upper left of the...
