Separate names with a comma.
Some features disabled for guests. Register Today.
How do you have your driver switches set? The noise you describe could be from too low of current or trying to drive it too fast. Should be...
Don't draw in 3D (no push-pull) watch the youtube videos from David the Swarfer [MEDIA]
I would guess your current setting is too high causing the stops, try dialing the current down a bit. As for software there are a bunch of free or...
With a moving axis, I can engrave or cut on a 2" thick part, then with the same short bit reach down and engrave a 1/16" thick part without adding...
I found that if you play with the jog distance and your jog speed you can find a sweet spot where it will stop with "button up" mine was something...
If you want to slot cut, lead screws... if you stick to trochoidal it doesn't matter much. With Fusion they call it adaptive cutting, this keeps...
Yes! this is cool, I've been dreaming of doing my front door, was going to puzzle part it together as I can "only" to 32x51" using 3 layers of...
You can do thick aluminum with a trochoidal milling scheme, even with a belted machine. You won't need to calibrate every time you move it as...
What problems are you expecting? Once setup properly you will be impressed with how strong and reliable those open loop steppers are, only time...
Glad it worked out, is it quiet now?
Good find! The pitch won't change the speed, it's all about the lead.. 10mm per turn is 10mm per turn no matter the pitch :) Actually these look...
I think the power needs to be cycled for step changes to take effect, i thought this was in the manual but i don't see it now.. As for the errors,...
There are some errors on the table you posted. By difference are you talking about the vibration? You are turning off the power when switching?
There is an easy way, with Estlcam, watch the video [MEDIA]
Reduce the current some more.. how hot?
strange, make sure you have nothing on Arduino pins 9, 10, 12 and $23=0 not 64 limit switches aren't super necessary once you figure things out.....
yeah it's confusing, go here Download - UGS download the 1.0.9 unzip the items into a folder you need java to open the .jar file no installation
that's a cool little mill, did you try a new g-code sender like UGS or the latest GRBL panel? some of your settings are strange, like 0 through 3...
I think all switches "on" would get you no micro stepping, but not sure why you would want to? [ATTACH]
yes, so 400 is 2x200 = 1/2 microstep (200 steps per turn is the 0.9deg step typical) 800 = 1/4 microstep.. For 8mm lead screws 1/4 to 1/8 (800 or...
