Separate names with a comma.
Some features disabled for guests. Register Today.
Nice build don't know how i missed this one! I scanned through the build but didn't see what voltage you are running? Voltage is speed,, so if...
Not worried about breaking the screws, but you are probably right, just have strong end stops! 397oz-in steppers at 48v (high speed) I worry with...
Honestly ball screws are overkill with V-wheels and V-rail. I would use linear bearings like MGN9 or 12 size. Can be found for not much more...
Probably wheels are too tight, causing backlash or missed steps.. also on a 1500x1500 you are crazy not using dual-belt IMO
Did some Trochoidal milling today, just doesn't seem possible when it starts cutting that DOC, amazing.. Using Estlcam to make the g-code, makes...
did you try less microsteps? do you have the 16 tooth or 20 tooth pulley on the stepper? 16 tooth will get you some more force.. Powge on Ebay a...
could always do a counter weight with a pulley or a linear spring
I would start by turning your max speed (110-112) up to 1000 and the acceleration up to 500 (120-122) also at 1/16 you should be at 200*16 =...
Weight isn't the issue, the nema34 size is much bigger and will not fit on the standard ox plates which are all made for nema23. nema23 makes...
why nema34? it's overkill for this size cnc
I think 1mm is too thick, more like 0.5mm is what you want. I used glue for mine with carbon fiber strips as 0.5mm spacers. Been running great...
Oh Right I read C-beam and think Ox LOL.. for that big Dual-belt Ox is really the only reasonable way, without going to 12mm screws or rack and...
15000? or 1500? no custom parts needed just cut the rails to the length you need. stock 1000x1500mm v-rail setups give about 820x1270mm cutting...
Andrew, I know on my ox plates it's hard to tighten the bottom two bolt, so the top two are doing most of the work for the Y and X plates. For...
What do you need to know? where did you get them from? Only thing I would say is I can't think of any CNC use where the anti-vibration plate...
I think most people never use reverse and just wire that for forward operation. unless you re-scale the 0-10v input you will never get full RPM...
17.4 :)
David, my genuine Uno ran it no problem, Motgor's xPro has the issue :)
I ran the Celtic file no problem even engraved some MDF. so it's not the gcode. I do not have a CNC xPro, I use Arduino Uno and UGS platform....
what are you using to make you G-code (and the drawing)? try uploading the file here and we can look at it, you might have an incompatible command...
