Separate names with a comma.
Some features disabled for guests. Register Today.
Congratulations on the new baby. I expect you'll be spending a lot of nights up late with it.;)
Not sure you can get down to the $500 to $700 range when you start figuring in VAT but you should be able to get down reasonably close if you can...
Aluminum can also be cut with template guides. It's less than ideal but it can be done. Just don't expect to be able to do 10mm in a single pass....
Have a look at the Ox. It is fairly economical to build if you cut your own plates (which really isn't that hard). It'll easily stretch to a 1000...
Beki, it's nice to finally have someone on board from Vectric. :)
I'm guessing it is because all her builds were transferred to the projects section.
You might also verify if this bit has a max recommended speed. The larger bits usually do especially on the 1/4" shanks.
What you seek is a linear encoder. 12m may be a bit of a stretch though as these are typically designed for 1m or less due to the ultrafine...
Might be easiest just to ask the parts store. http://support.openbuilds.com/support/home
I'm well into my second batch and have never had a problem with any of them coming apart. From the reviews there may be a QC problem or it may...
If I'm following you correctly, you may be able to achieve what you seek with a simplified version of...
If you do, be sure and pick up a cut off kit to go with it. After a few uses, you'll wonder how you ever lived without it.
Mount the wheels using the 30mm screws then break out the Dremel and saw the extensions off flush with the nuts. Any burrs will be inconsequential...
Sorry, misread your issue. Yes... plate, bearing, 12x8x1 shim, lock collar.
The 8mm shims you seek are probably the ones included in the mini-V wheel packs. BTW, the forum is a much better place to ask questions than...
The drawing in your original post shows the answer. The screw is centered on the channel which would be roughly 46mm from the bottom wheels and...
Do you have links to the screws and nut blocks you are considering?
Depends on why you are doing it.
