Separate names with a comma.
Some features disabled for guests. Register Today.
Having been a forum member for 4 1/2 years and having looked at nearly all of the 900+ builds listed on Builds Page, I don't recall anyone EVER...
It's pretty much six of one, half dozen of the other. Propulsion and member size are the same on both. The only real differences are the number of...
Can you elaborate or at least throw us the question you're getting conflicting information on?
Actually it is the motor that will be under powered. It will behave like a 2.5A motor. This won't harm either the motors or the board you just...
The larger, boxier extrusions of the Shapeoko XL will probably have an edge when it comes to stiffness but I'm not sure if there will be any...
Without knowing what size machine you're interested in or what you intend to use it for it is really hard to answer such a question. Both machines...
There is only one answer to such a question and that answer would be "Google". And no, that was not intended to be a smartalec answer. Nor a...
Are you just cutting them or are you needing to shape them too?
You're on the right track with the dust collection system shown but as far as which brand or model is quietest, you'll need to do the research...
Generally section width +12.0mm works with the mini-V wheels so in this case the dimension you seek would be 52.0mm center to center. That being...
Consumer grade vacuums are not designed to be run endlessly. They don't cool well and certainly won't cool well if put in a soundproof box. The...
You basically lose the width of the plate which for the one shown is 88mm. So for a 1000mm section you'll come up just shy of 36". When you...
So how is the Shaper Origin to work with? They're so new I haven't seen much feedback on them yet.
Yes. Just round off the corners and paint it black. Nobody will notice its not quite as cool. BTW, if you're ordering from the source noted, try...
Fairly simple to make your own using cuts from a 1-3/4" x 1/8" angle. And by swapping the regular bearing for a flanged bearing you just cut a...
To clarify, are you wanting to move a sliding screen door or a sliding glass door? Belts are fine for screen doors but are not likely to budge a...
How easy or how difficult you want to make this is really up to you. At the easy end, the high torque DC motor is certainly an option but the...
You hook it up to a stepper driver which is hooked to a power supply and a controller. But as I get the feeling that really told you nothing, the...
Bummer. :( Best wishes. Hope the rebuild goes quickly.
Only one piece of the 20x40 needs sawn off and it doesn't have to be perfect. Fairly simple work with a hacksaw, even easier with a chop saw. As...
