Separate names with a comma.
Some features disabled for guests. Register Today.
With the light loads you are dealing with these plates could easily made from wood or acrylic. And with the proper finish, hardwood plates could...
Have you considered using your newly rebuilt Shapeoko 2 to make them?
Choke up on it a bit. You want the distance from the end of the bit to the mount as short as possible as this minimizes leverage on the assembly....
Yeah, been out a while. Nice to see them finally in production. [MEDIA]
Absolute load capacity of this system is irrelevant. It will support what it is designed for (a laser module) many, many times over so there is...
The fixed bed conversion has been performed by a number of members with great success. A few links are attached. I can't speak with regards to...
Good start. :thumbsup: One suggestion I would make would be using a C-Beam XL gantry plate on the X-axis. The wider grip of this plate will...
Knocked a plate together and came up with 12.9mm clear between the wheels so even accounting for minor dimensional variations you should be fine...
Due to slight variations in the extrusion runs, it would be hard to say if in any other assembly will be exactly dead on to the tolerances that...
You are grossly over analyzing this. Anything from SDP/SI or B&B will be dead on perfect (even if their publicly available cad representations are...
Actually there is misrepresentation on multiple levels. But to get a better idea of where things got off track let's start with GT2 belts. GT2...
https://openbuilds.com/builds/c-beam-big-mouth.3625/ https://openbuilds.com/builds/dream-to-practical.3722/
Looks like a fairly stout build. Any video of it in action? (BTW, nice looking Mooney. :) Don't see too many of them around anymore.)
Assuming that's a 1/4" plate, consider using 12mm screws instead.
Here is a method for laser setting the powder coat with a low power laser. While it is the reverse of what you seek, you could just as easily burn...
Would "counterfeit" be a better word? The issue isn't that they are making open source parts, it's that they are claiming them to be genuine...
A pair of Inside Hidden Corner Bracket to trap either a wheel or the plate. Could also easily be done with a pair of t-nuts and a pair of Cast...
There are a couple of issues here you need to understand. First, if you intend to cut anything hard with it, a CNC by necessity becomes a brute...
You'll need a vertical axis lathe if you want any hope of these rims actually being round and there are currently no builds of such a nature on...
Yes, you can attach more than one driver to each power supply connection.
