Separate names with a comma.
Some features disabled for guests. Register Today.
The issue isn't the size of the screw but getting the threaded nut to fit within the limited space available. From the center of the screw you...
Constant force springs would allow you to do it without even motorizing. Example - Source - Another Source
Yes but only if you use a considerably less aggressive screw. The weight of the machine would overpower the supplied TR8x8 the instant the...
While this is generally a symptom of something being too loose in the system there is also another possibility. This issue has also been noted...
Every rotation of the stepper moves a screw drive system 8mm. Every rotation of a GT3 belt drive system moves 60mm. You would need a fairly...
That's nonsense. You have apparently identified a bug in the cart system though. You might contact the parts store at...
Your V-slot could also be slightly oversized. Same with your wheels. Where did you order them from?
Yes, you've got it way too tight. Don't know which set of drawings you cut your plates from but the 8.0 version had the axle holes a bit too tight...
The ACRO is the wrong starting point for a plasma system. You'll want something with metal plates and somewhat beefier framing.
For PCBs you might consider a depth regulated floating head. There was a discussion on the subject a while back.
Here is a suggestion from a previous post. It's a little bigger than what you seek but could easily be scaled down, especially the long axis...
Matheu, The img file you have included in your post is behind a firewall and doesn't show up. Please save it to your system and then drag and drop...
Using pitch diameter on the gears should work but it's far easier (and definitely more reliable) to use - SDP/SI eStore.
BTW, that is a truly excellent table. :thumbsup:
Would suggest either the Ox or the WorkBee systems
You might take a look at Adjustable Router Guide Template. It shows rails sliding relative to rails but it's not much of a stretch to transition...
Nice design. I especially like the router mounting system. I would however suggest swapping the X-axis rails, moving the powered rail down closer...
You may find these two pages useful. MPG CNC Pulse Generator 4 Axis Pendant Handwheel & Emergency Stop for FAGOR GSK USA Stock-in Smart Remote...
Until you provide some useful information, don't expect any useful information in return. I just checked on Amazon to try and get a better idea of...
Unfortunately the hole spacing on the reduction/stand off plate really can't be modified to work with the nema 17 stepper. The plate suggested...
