Separate names with a comma.
Some features disabled for guests. Register Today.
If you have FreeCad questions it is best to ask them in the CAD section of the forum or because it is not a program not used by many here, it may...
A 1/8" shim will raise it enough to clear the end plates.
Attached is a Sketchup file showing a protected screw approach. The whole X-beam moves rather than just the gantry plate and the Y-beam has to be...
There's really nothing special about those custom side plates. Get some flat bar stock of the proper width, cut to length with a power saw or even...
If you're using one of these you can find the wiring and other information here. If you are not, you need to provide much better information for...
Updated suggestion attached. Increased envelope to 300x190x150. If you intend to use long bits you may want to reverse the Z-axis. [ATTACH]...
Here is a better idea of where I was going with the previous comment: [ATTACH] Sketchup file attached.
Sorry, I've been out for a few hours and am just now catching up on the conversation. Based on what you are showing you might consider up-sizing a...
Would cutting a blockout in the base board of the Workbee and dropping your blanks down into it be workable?
What about the Ooznest designs doesn't work for you? (This give us a starting point to help send you in the right direction.)
It's based on the cutting area desired. Don't oversize any more than absolutely necessary. The TR8*8 screws useful length maxes out around 1...
A constant force spring is also a suggestion. Example - Source - Another Source But we digress as this is a subject for another thread. Please...
First class mail is already available.... NEW Lower Shipping Rates
I would suggest hand cutting plywood plates instead and using them to create the aluminum plates. It will save a whole lot of print time and has...
You really won't have your answer until you fit them up to a specific piece of C-Beam. While it would seem that all C-Beam should be exactly the...
Consider using twin rails and setting the screw between them.
Actually I'd like to see a "save cart as" function so I can have any of a number of active project estimates going on in the background. One of...
Fairly simple endeavor. Split a length of aluminum tube lengthwise and bolt the pieces to the sides of the 20x20. If you fit your threaded block...
You might take a look at C-Beam™ Machine - Plate Maker. You should be able to create something similar with what you have to work with.
I get a facebook login page. Not much value to those of us who don't have a facebook account.
