Separate names with a comma.
Some features disabled for guests. Register Today.
Having the surface absolutely level with the ground is not a requirement in any way. Many of the builders have their systems on carts that sit on...
500x500 will probably take members on the order of 750mm in length so when you add steppers to the end this may hamper mobility unless you have...
Based on what Ryan is saying, it has to do with breaking up prepackaged kits. There's a lot more difference than just a gantry plate. Wheels are...
Yes, but as it is designed for a 60mm width it will set slightly off center on the 80mm width of the C-beam Z axis. Cutting area will just reach...
No, there are 2 Y-axis rails. But if you take the XL BOM and subtract the 1000mm cbeam and screw with its end plates, bearings, collars, washers,...
Ryan, you might even give some consideration to updating your C-Beam offering to the new XL style. No sense continuing to sell an outdated design...
Actually it's a plesiosaurus... Has Mark recreated all the Harbor Freight dinosaur models?
Shopping cart attached. Fairly certain I got it all but no guarantees. You will need to add a DQ542MA Stepper Motor Driver and 2 Double Tee Nut™...
So when do we get to see the rest of the new mini mill? :)
Simple pen holder concept. Back plate to be mounted to Z-axis. Rubber band at rear maintains positive tip pressure while moving across paper,...
Yes, the solid V wheels are correct. But don't order just yet, let me go through the parts list one more time as I have dropped several items...
Yes, the block is attached to the gantry plate and the the gold nut sets down inside it and is fixed with a setscrew. The block is attached to...
Revised model attached. It's a fairly straightforward build. Look it over and see what you think. Cutting area is approx 780mm x 830mm and will...
If you're going with screws you might as well go with the C-Beam framing as it is the easiest to integrate screws into. And there is no need for...
Spend a little time at instructables and you should be able to come up with plenty of ideas.
Can and should are two entirely different things. It's best not to. Anyway, attached is a quick Sketchup model and a prelim parts list. Please...
Based on not needing substantial Z axis depth this will be fairly simple to build. C-beam rails with screw drive using the rail pieces you...
I think it can be done given that you already have most of the electrical parts. Also hang on to the mini-V wheel sets you have as you'll need...
No such thing as failures here, merely concepts needing a bit of improvement. (Trust me, I've had my own share of them.) So before you throw in...
As Grantman noted, a hotwire system may be the best approach as the other issue with your request is the .3 m cutting depth. You can only cut as...
