Separate names with a comma.
Some features disabled for guests. Register Today.
Rather than over the top, I would suggest the actuator set off to the side below rim level and merely have an arm that extends over the tray....
I came across an issue this weekend that may or may not affect you. I set up a standard gantry plate to fit a recently purchased piece of 20x80...
Search is in the upper left hand corner of the parts store web pages.
You could also go with a screw with a shallower pitch. The TR8*8 is considerably more aggressive than a Z-axis really needs. A TR8*2 is a bit more...
Oops, meant M5x35... As for the connection, it's fairly simple. The threads are tight however as this end of the rod was not intended to be...
Worked like a charm. Removed the bicycle bolt and threaded in an M8x35. [ATTACH] Sawed off the bolt head and added back the original shoulder...
Welcome to the forum @TrishC. :thumbsup: (It's about time you joined us.) The rubber bumper upgrade I was referring to can be found at Toggle...
A TR8*8 screw through a nut block won't have sufficient holding power to be of any value. You really need a clamp of some sort. The one you have...
As for the larger holes, they are 7.14mm (9/32") and this dimension is critical for proper fit up with the eccentric spacers. For the smaller...
There must be some new help in the shop... o_O Yes, you were supposed to get 10 per pack. Be patient on the reply as it can often take them a day...
A suggestion with the regular nut blocks when they are too tight is to chuck the screw in a drill and run the nut up and down a few times. May...
Yes, the V shaped ones not the solid ones. Polycarbonate is great in compression but the tensile forces created from riding along a pointed edge...
Yes, the results from the Strong Ox are the reason why the regular Xtreme V-wheels are no longer sold in the parts store. Totally inappropriate...
dumpsterCNC - anti-backlash solutions for home and industrial linear motion May take a bit of thought to mount but the way they're made you...
Sounds like the parts store may have gotten a bad batch. I have ones nearly two years old that are perfectly fine and in the roughly two years...
Put simply, if you want more than 12 to 14" usable on the y-axis, you are best to go with a fixed bed. Moveable platforms have increasing issues...
V-Slot connector
I would suggest modifying the original drawing to include the chamfer and deleting all but 3 of the 5mm holes, keeping ones as widely spaced as...
Actually that should be a note to all. These cuts are made on the fly as the material streams out of the extruder and a perfectly square cut on a...
There is no mix up between the two. The TR8 threaded rod used here is a 4 start with a 2mm pitch (0.079") which makes for an 8mm lead (0.315")....
