Separate names with a comma.
Some features disabled for guests. Register Today.
What exactly does 45mm mesh with? Sure that's 3 times a 15mm extrusion but we don't use 15mm extrusion here. And I could understand 50x50 as...
You'll find 13/64" and 9/32" fit nicely if you have access to imperial bits.
For the 6000mm length you will probably want to use a double belted system to help deal with stretch in the belts. For the 700mm length you can...
Far as I know, pretty much everybody cuts their extrusions with a power miter saw. A non-ferrous cutting blade with lots of carbide teeth is...
This is a problem that pops periodically due to fabrication tolerances. The side-to-side framing members in the base are too long. You'll need...
What software do you intend to use to run your system, GRBL or Mach3/4? That will narrow down the possibilities.
There's a set of pdf files hidden within the Solidworks 2014 Parts Library download. Why they are hidden there rather than given top row billing...
You might read over this thread: Major issues with these forums as it may give you a better idea of what has transpired. You may need to create a...
I have to disagree. If you hadn't asked the world wouldn't know about the PTFE tape trick.
Contact Mark. There was apparently some corruption in the user database and some things may need to be reset to get your user profile back in order.
C-Beam™ Linear Rail
Something like this? Project - Small no thrills cover for the new 24v 14.6 A power supply.
Can't wait to see it up and running. :thumbsup:
Not a great example but the quickest one I could pull up from old files. This is from a hot wire cutter example. Reference the vertical...
Low profile is necessary when you run screws through a gantry plate in both directions. The wheels hold the extrusion out just far enough from...
Yes, the anti-backlash piece helps the lead screw blocks grip the threads and not just the outer diameter like the bearings do.
More than likely it is the screw that is undersized as this is something that has been noted by several others lately. Searching for alternate...
Take a look at the mini-V gantry plate and mini-V wheels. Its only 50mm square so it really doesn't look all that disproportionate to the 20x20 rail.
