Separate names with a comma.
Some features disabled for guests. Register Today.
First thought from the title of this thread was "just where exactly do you plan to put that stick that won't make the ox mad..."? But seriously,...
7 XL plates. There are 2 plates back to back between the X and Z axes.
Somewhere back in this thread there is a nice design showing outrigger wheels used to stabilize the plate but I can't seem to put a finger on it...
I might suggest too that if you have compressed air in the shop it's great for blowing the particulates out of the channels.
Have you done any modelling to verify that the TR12 screw fittings (anti-backlash nut, collars, etc.) will actually fit within the space that the...
pdf attached. These are for the standard Ox which uses a 60mm X-axis gantry beam. You will need to adjust them if you wish to use the 80mm deep...
Thank you for clearing that up. It would probably be best to ask the question at Inventables however as it is their system and they would know...
What model controller board and what are the specs on your power supply? Are the Y motors slaved through a single controller?
Not sure what the problem is as the forum is totally unrelated to the shop but the delays are likely related to the significant number of orders...
Thanks for checking.
For a while... and then it will lock up. There's a discussion a couple years back in the forums with one of the insiders regarding the built in...
So when it's too cold in the garage you can move it into the living room. Sweet!!!! :thumbsup:
If you would, please take a snapshot of the sticker and post it in this thread: OpenBuilds Was Here!
You really don't need Ox plates. You have everything you need in the C-beam XL parts kit to create a stationary bed-moveable gantry type system...
Try OX CNC Machine Kit | Ooznest CNC Hobby Kits
At that price it is likely counterfeit software and if you'll read his feedback someone has already noted this. It is best to get it through a...
For single thickness extrusions most people just put a mirror image of what is behind the wheel on the opposite side. I.e. if you have a 1/4"...
If It weren't for the size of the system, I'd recommend a two plate system with the pulley sandwiched between two plates rotating on a simple...
Yes, you need the separate drivers as the motors are too powerful for the onboard drivers. You also need the separate drivers to be able to use...
How big are your steppers, what type of system do you plan to use it on, and how big of a power supply (volts, watts) will you be using with it?
