Separate names with a comma.
Some features disabled for guests. Register Today.
You can simplify that concept by eliminating the plate and spacer and merely inverting the screws. Drive them in from the bottom side leaving a...
Not aware of any off-the-shelf items but what you seek is easily fabbed in Delrin or hdpe or even 3D printed. Aluminum is also an option but how...
OX DIY CNC kit may be your best.
It's all fun & games until a grizzly wants you to share....
There's gonna be a Symphony? Must be quite a rollout. I hope I'm dressed okay. :confused:
Based on what you are needing to achieve, I would suggest taking a look at C-Beam Prefab Untitled, C-beam Sphinx, and C-BEAM-GTC. The vertical...
You can't re-tap the existing nut blocks as that will do little more than trash the threads that are already there. You will need to start over...
It's fairly common to run more than one stepper off a single Arduino and power supply, assuming of course the power is of sufficient size to run...
Something fishy about this concept....
Mark already beat you to this one. Digital Wood Joints
Better explanation: [MEDIA] Overall a bit of a hack job. There are better designs out there. The Woodpecker offers a much more balanced...
Not sure if one of these will fit: Anti-backlash Nut for Tr8*2 Lead Screw - RobotDigg Or you could cut your own based on the openbuilds design:...
The best approach is shown in the C-Beam Big Mouth build. Merely making the sides taller and then reaching back down with a longer Z-axis reduces...
If you're looking for suggestions on line boring machines, you might take a look at CNC Line Boring Machine As far as gantry length, typically...
Pitch is the distance between adjacent threads. Lead is the distance covered along one rotation of a single thread. Starts are the number of...
Depends on the size of the parts. If the parts are bigger than the bed it is best to have a stationary part and a moving gantry. If for instance...
o_O Link doesn't go to a screw shield.
No, just apparently no one has an answer. That's a question best asked in the XPro thread.
If you're in a hurry, the tinyG controller would meet your requirements. The XPro2 is another option but not sure when the store will have them...
@gwandad, there have been a few reports of the holes on the plates being too wide for the vslot. If Moag's suggestions don't solve the problem,...
