Separate names with a comma.
Some features disabled for guests. Register Today.
Lstj, need a bit more information about the problem and your system. How long is your X-axis and what size router are you using? (Photos showing...
If you're just looking for a means of squaring ends and matching lengths, I can offer an alternate suggestion. I just use a router sled on a...
That is the first saw that Jonathon suggested. Its a sliding miter saw. You'll see the same view if you scan down through the amazon photos.
I must say I am a bit intrigued by the evolution chop saw when I think of how often I'm cutting metal and plastics on my Delta miter saw (which...
Scott, the Sketchup file you seek is in the files tab above and labeled V-Slot OX_Build_81 3.20.2015.zip
Entirely different style machines. But the main difference in your case is the shapeoko uses belt drive and the C-beam uses screw drive. Belt...
The stationary bed of the Ox allows for materials longer than the bed itself to be milled which would make it ideal for longboards. The process...
For milling aluminum, the C-beam will offer better resolution than the Ox. Then it just comes down to which size. If you need the larger area,...
Really no guides that I am aware of. All I can suggest is posting examples of what you expect to be milling and let other users offer their...
If you're talking 2 kg loads, yes it would need a keyway or at least a D-shaped shaft opening. But at 2 kg you're also getting beyond the...
As far as books go, I've never looked at any. I find instructables.com a decent source of information for level that I would be working at. (i.e....
I use a full face shield. The shavings are fairly nasty. Use dust collection if you've got it, otherwise your shop will look like it has been...
Not aware of any kits but you might check with the author of this build for a parts list or Sketchup file. It was a fairly straight forward build...
I wouldn't expect to see worm drive systems like those you have shown any time soon. Cost to manufacture would put them well beyond the hobbyist...
Belt should be fine and probably the best option for speed. The only real sticking points on what you are wanting would be the gantry span vs....
Obviously would depend on the strength of the nema 17 steppers but here is a project built successfully around them. Stinger V Micro Mill. It's...
For depths that shallow you will probably want to use a depth regulated spindle mount. More information on the subject can be found here: Depth...
Contact the shop to see if they still have any. http://support.openbuilds.com/support/home You might also check with the other distributors regarding...
I know, I have a set. But it's the size of the opening in the spindle the collet fits into that matters not the size of the nut they hold it in with.
These are custom fit to the Dewalt 611 routers and only fit the Dewalt 611 or the Porter-Cable 450 routers. Nothing else will be a direct...
