Separate names with a comma.
Some features disabled for guests. Register Today.
Which Extreme Precision Collet Kit? There are a half dozen to choose from depending on which router you specified you were getting it for.
That's a question for Mark but I probably wouldn't get my hopes up, at least not in the near term anyway. It's not as simple as just adding a...
Actually, its not a QC issue. There were enough complaints regarding the fit of the original screws that the new ones are intentionally being...
OpenBuilds Spindle Adapter by Tharris17
Define "machine parts". Cutting sheet goods and slightly thicker stock is doable but don't expect to be milling down 4" thick blocks. 1/4" bits...
Sorry, but I was hoping one of the experts from this section of the forum would jump in here. (This is not my area.) From an outsider's...
A single 40x40 will be significantly better than two 20x40s back to back.
Consider adding short pieces at the sides of the C-Beam, running out and connecting to the first interior crossbar. This will provide better...
The plates are not the issue here, the problem is the wheels. The V-slot extrusion has beveled edges along the track that the wheels ride down...
Nice and smooth. If you would, please add a photo of how you put the electronics together. Thx.
The location is fine you just didn't quite put the comment in the form of a question so nobody responded. Steps are fairly simple. 3.1416mm...
It's a legacy thing but it still does have its uses. It is a great solution if you are wanting to use a larger or stiffer size than v-slot can...
The anti backlash nut loosens up with use. The Openbuilds parts store used to sell the true 8mm screws and there were enough complaints that now...
While the best solution would be the C-Beam Machine Mechanical Bundle it is a bit outside your budget and there is really no way to scale it down...
This has never been claimed to be anything more than a hobby grade machine and a true professional would judge it for what it is, not what it is...
For anyone to offer reasonable suggestions there you will need to provide a better explanation of the nature of the anticipated output. A machine...
The drive system should be fairly simple as it appears to be little more than a basic X-Y table. The best example of one (conceptually) that...
The extent of the required parts needed to revise the previous version to the XL will largely come down to user's budget and the desired outcome....
Steps per mm = (steps per rev of stepper/mm per rev of screw) x ratio of gears = (200/8) x (40/16)...
On the shipping time it's not as bad as they claim. (And it can be even worse, but I'll get to that.) My first order with the slow shipping...
