Separate names with a comma.
Some features disabled for guests. Register Today.
Actually screws are the easier of the choices. There are several examples in the forum including one here. R&P is what is going to be difficult....
As David alludes to, optimization is related to what you intend to cut and if you are intending to cut a broad range of materials, your choice of...
Seriously, the t-nuts are really not that big of a deal. Get them in alignment, slap a strip of blue tape over them to hold them in position and...
That's an SMW3D project that I don't believe has ever been discussed here. Files are available at: Files - SMW3D R7
David's comment referenced the first iteration of the design. [IMG]
Thx. I didn't realize youtube did live streaming. (learn something new everyday)
How are they getting the feed? Are you streaming it live somewhere and they just picked it up?
Elliptical maybe? Or even hyperbolic or logarithmic? ;) Those certainly are not conical.
Nice work. The only thing I can suggest would be moving the Y-axis rails inward 40-50 mm to reduce the span of the main plate. This will help...
You might consider moving the nut blocks outward 1 row of holes as that's what those holes were designed for. The elongated openings allow for a...
Also after seeing your tabulation it occurs to me the 0.35mm dimensional error can easily be resolved by swapping out the upper row of 6mm...
Mini-V wheels use a 4mm bearing.
The forum is a wholly separate entity from the Openbuilds store so you'll need to contact them directly for that information. You can either...
I have a couple of older stock mini-V plates and they are 6.35mm. I'm not sure what the current stock is measuring but it would seem if both...
Dimensioned PDFs for parts can be found within the download on this page. http://www.openbuilds.com/resources/solidworks-2014-parts-library.160/
Nice design. For your outrigger supports, you might consider the Mini V Gantry Plate™. This will give you a better thickness match to the center...
The vertical mounting issues can easily be resolved with constant force springs. Example - Source - Alternate Source They're not terribly...
Reviews on Amazon(US) were not very kind. If you already have a circular saw, you could easily set up a similar sled with a couple short lengths...
The plates were designed for the C-beam system which doesn't need two plates so there is no other side. To adapt them for belt use you would just...
If it's any help, the motor part of the DW611 is only 3.4 lb., considerably less than the shipping weight that is given on Amazon. And honestly,...
