Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, I use the 'Fusion built in Grbl Post'. If you are not using that postprocessor ignore my comment.
Hope this helps, I had this happen to me recently... I found that the post processor setting for safe retracts was set to G28 when I had always...
Sounds like you are on to a cool solution, the beauty of the openbuilds stuff is that you can take a machine and rework it to fit your needs.
I have 120mm between the bottom of the z-axis and the top of spoil-board, so your enclosure would not fit the way mine is configured. If you...
I have a footprint of roughly 500x500 and a cut area of 325 x 335, at 750 x 1000 you should be able to have a cut area of 575 x 835 or 22.6" x...
King, Here are links to the fusion 360 files for that bracket bracket CAM file for bracket Let me know if you want it in another format,...
Simple and sturdy, I like it.
I would get the 10mm, if you have to face it off to make it flat you will have extra thickness to work with.
The z-axis that I have has a 15mm thick backplate at the sides the center is thinner to allow clearance for the ball-nut. . I had this unit on...
So I got the SparkFun Pocket Programmer today, they have a great hook up guide on their site. I tested the whole process of burning firmware with...
Thanks, Thanks for the reply. I did see(and try) the configuration in your documentation, at this point I am exploring the different configs...
Thank you Peter and Shawn. I have the USE_SPINDLE_DIR_AS_ENABLE_PIN option working now. Only one drawback that I did not know about pin 13 is...
Thanks I will take a look at the grbl wiki.
I am wondering if someone could help me find directions for making custom firmware for the black box. Specifically I want to set up grbl with the...
This is awesome. Now you have me thinking about what I would change before I even have my build done. Like maybe I could have a tool height probe...
Your cutting parameters also depend on what cutting strategy you are using, contour, pocket adaptive etc. The ER11 should preform a lot like the...
This is a simple holder for your xyz probe. I printed this standing up, I did use supports but that is probably not necessary. There are two...
that-jim submitted a new resource: XYZ Probe Plus Holder - Simple 3D printed holder for your probe! This is a simple holder for your xyz probe....
Your KRE mill looks awesome. Thanks for the input, I will plan on working something out for protecting the rails and especially the belt and...
Thanks, the footprint of the machine will end up at 700 wide and 760mm deep with a cutting area of 380 x 500mm. I could certainly get a bit more...