Separate names with a comma.
Some features disabled for guests. Register Today.
Strange issue this morning. Headed to the workshop as normal on a Sunday and fired up the power supply for the cnc / controller etc Normally...
I'm running belts at 5000mm / min with no issues, but will be rebuilding to move over to C Beam and Leadscrews (Ballscrews when i can afford it!)...
Glad you shared my superb experience with Ooznest. I'll be converting my 1500 x 1000 Ooznest OX to C-Beam and Leadscrew and you know where i'll...
Looking to convert my Existing ooznest OX to CBeam / Leadscrew (Re-using whatever i can and selling on the rest), but having difficulty finding...
Not got any issues with mine. First thing i did was add heatsinks. It took a bit of trial and error setting the current pots, but once done its...
Thanks Everything is 18MM - tend to cut fast, but shallow (5000m / min at 3.5 - 4.5mm depth, with s pindle speed at 12k on a 3mm twin flute bit)
Ben working the Ox hard for the last week or two cutting test panels for the arcade machines i make. Got the final product finished last night....
Daft question, but the second Y axis stepper has been mirrored in GRBL to run in reverse? I did mine by reversing the cables for one of the...
Very informative post David - Really appreciate the information, and i'm sure it will be of interest to others. Thats what i like about the...
Been having a very minor issue when cutting anything with an arc in it such as my arcade bartop side panels. When cutting the straights its...
Is it worthwhile to drop to a 16 tooth pulley for added accuracy (20% more accurate in theory) Have done a search and not come up with anyone...
Thermal overload can cause the drivers to completely shut off until a 'safe' temperature is reached. This could be a fraction of a second or a...
I will sort my settings later if i venture into the workshop. I'm running 1/16 stepping (More for accuracy), and my voltage is at 24.9 (To allow...
I'm running the standard 2.8a Nema 23's with a 24v 15a psu and the cncxpro controller. Quite happily cutting away at 5000mm / min and above. 3mm...
What psu are you running?
I've found one of the best ways of keeping dust down is keeping the spindle speed at the right level. Too high and it just turns the MDF to dust....
To be honest it is not that noisy in operation. Mine started out noisy but tuning the steppers and adjusting the tension of the wheels so that...
Confirm the micro stepping. I had to adjust the grbl setting on my ox when I changed from 1/8 to 1/16 stepping.
Unsure of improvement, but i went straight to dual belts as it was easier to order the extra when i ordered my machine. In theory it should make...
Are you running single or dual belts on each stepper?
