Separate names with a comma.
Some features disabled for guests. Register Today.
Not to be a party pooper but I highly doubt this would do anything to reduce the whip. 8mm leadscrews are relatively thin in context to a 3 foot +...
The clamping style is all that is needed honestly, I have done a significant amount of work when I had my Sphinx to eliminate all sources of...
Agreed, I think you can also find them at Mcmaster.
You will see improvements with going with the clamping collar style. One of the issues that I found was unless you machine a flat onto your lead...
Thank you, I have watched many of his videos, and yes very lengthy. His videos are best served by watching on one screen and working in Fusion on...
I see you liked my response, so I will add one more thing for you to think about. If it was me, and I had to bang out say 100 of these, I would...
I just looked at the video, and he is doing as I explained, developed a workholding that allows you to put in the box, clamp it down. There is the...
I will try to make this as simple as possible. This is a simple job. You would have to design the CAD/CAM file. I would recommend that you use a...
Thanks David, I am decently proficient, but wanted to see if anyone is willing to bounce around ideas on certain things. FusionFridays are great,...
Ahhh, gear reduction drive. I just not a fan of that, to me the more parts, the more chance of something going bad. To each their own. Good luck...
I don't know what you mean by Belt drive. The Sphinx is leadscrew driven. -The bottom plate doesn't really serve any purpose other than looks....
Check out my build, I build a Z Axis just as you are describing, might help you out some. HD CNC
Looking for someone with Fusion 360 that would be interested in messaging regarding features, ideas, etc.
I don't want to cause alarm to anyone. ER collets are deemed the most accurate of any collets/ bit holders. I have not noticed any errors in my...
Hi All - I wanted to share an experience with you all and get some feedback/discussion on the matter. Been working on some cool workholdings, and...
Really nice looking cut right there! What was your DOC on this?
Search Thingiverse - Thingiverse
Well there is only one way to know for sure. Many guys 3d print a piece that sits on the collet and acts as a fan. I will see if I can find a link.
Climb cutting should be used, I second that. My recommendation would be to do some test cuts, start off with .20-.25mm doc. I can tell you...
I've done a considerable amount of aluminum cutting and the settings I used were along these lines: 3.175mm 2 Flute 24,000 RPM 635mm/min .5mm...
