Separate names with a comma.
Some features disabled for guests. Register Today.
I hope it will use the same non 3d printed parts as the original one! It takes forever for parts to come from China and the parts for the original...
Very very nice and clean build!
Very nice and clean built! Definitely nicer than when I build it! :( I'm intrigued by your needle-nose pliers. Are these for left handed persons? :D
I reassembled yesterday my 3d printer after is was in storage for months. It uses the RAMPS 1.4 board. When I finished none of the axes would...
Actually, MG, you can import .stl files into SketchUp. Google it and you'll find the addon to Sketchup. The only problem I have with importing...
Joe, I'll be following your build since that is something I plan on doing too. If you don't mind, can you also post files of parts that you made...
HAHAHA!!! That build is so ghetto, even more ghetto than mine was when I first built it. Excellent out of the box thinking! :thumbsup:
Or just a sheet of plywood on the back, 0.25" may be enough, will eliminate any twisting.
The belt can not be locked in any meaningful way. One way to solve the locking is to use a thin threaded rod, like #6x32. It has teeth every...
If you have the right bit to do the carving in stone there is no reason why the OX will not cut/engrave a stone, as long as you keep the speed and...
Stam, it looks to me, in the pictures, that the z axis extrusions are exactly as you suggest, the 40 along the y axis the the 20 along the x axis.
The way I see it you will need to zero the stop every time you turn on the machine since it will not know where it is. If the machine is on all...
I had looked at it too. I found that he became greedy as he became successful. When he started it had cost $40 (US :() now that people like it he...
LOL...yeah...should have sold your PP1! I keep my PP3 too. I used it for WAY more materials to cut than it originally was intended to be used.
On my 3d printer, which is similar in construction, I use a computer power supply rated at 360W which is about 30A. Take away the extruder heater...
You could use the Misumi since there are no wheels used in this build that has to run in the V-slot.
If your stepper will not move but just make a hum you may want to check the amps setting. It may be too low.
You may want to put some support in the center so that the plywood will not be able to sag in the middle.
As I've mentioned last year, I bought these. They are excellent quality. I bought the 2mm pitch ones. They are strait and gave me excellent...
If your motors are running hot than the currant is too high. Set it lower as per the table printed on the driver. Start with 1.7A and if it...
