Separate names with a comma.
Some features disabled for guests. Register Today.
No easy way to add external drivers to the blackbox, but you don't need to worry about it - you should run steppers at about 60~80% of their...
G-code is not very standardised - there are multiple "dialects" - there are even variants of grbl. Even though your controller has 5 stepper...
Good suggestion from @David the swarfer, although I'd do the macro as two lines ; G21 G53 G0 Z-10 G53 G0 X-10 Y-10 Raising Z first means it...
Vacuum press (also called a bag press) would definitely help - 15 lb/sq inch pressure over the whole surface. Alex.
If you home your machine and then set your workplace co-ordinates system zero that is stored in eprom as an offset from your home (machine...
Thanks @David the swarfer - I'll have a look into that, although I only use it for helping other people - don't use dxf's much myself. Alex.
If steel proves too much for your machine 6082T6 aluminium would probably do the job. Alex.
They are rather large for empty files :eek: - I'll have a look at them later and also post some svg files which should open in estlcam. Alex.
Alex.
Sketchup and step files might be of interest to you? Alex.
Like this? [ATTACH] If so I have modified both files, but I only have the personal use license and can't export dxf files - Fusion files...
So I'm assuming the pic shows it upside down, the holes near the bottom want to stay where they are in relation to the bottom of the plate, the...
Is the dimension labelled in the pic what you want increased by 2"? [ATTACH] Alex.
Are you wanting that back as a dxf file? Alex.
First try some dry PTFE or Silicone spray lubricant on the leadscrews. Alex.
There is only one motor on the X axis in this build. I have a workbee with linear rails upgrade (and single X axis motor), although some twist of...
Why do you think it will need dual X motors? Alex.
As @Peter Van Der Walt said it could be an intermittent connection on your stepper motor wiring, but I think a mechanical issue is the most...
Try having a read of this resource by @David the swarfer. How to 'Fake the home' Alex.
Not all of the 6000 series, and the T6 means it has been tempered to make it harder and easier to machine. Alex.
