Separate names with a comma.
Some features disabled for guests. Register Today.
It would be really good @Bigmontel if you could post a new thread in resources section and upload the modified post processor there. Not everyone...
Well spotted @Brandon Hurst, tiny currents but very high voltages generated by vacuuming wood dust. To ground it you need to wrap some copper wire...
Not likely. Alex.
How old is the router? If old may need new brushes. The symptoms sound very much like EMI, but you have the extension limit switches and have your...
Air cut with router on or off? Alex.
One solution @Jared Hulbert would be to drill out and re-tap for a larger grub screw. Some people have a similar problem with the flexible...
That sucks @Matt Riberich. I can only comment on what I have learnt from others here, but no, that shouldn't happen. Which part of the world are...
When you jog your X axis in the positive direction which way does it go - left or right? Alex.
Ooznest, who designed the Workbee, recommend 3Kg (6.6lb) maximum router/spindle weight (and say you can push that a bit), so at 7.3lb you aren't...
You are welcome @Matt Riberich, that's what the forum is here for. Alex. :thumbsup:
I'm not sure if he's doing this (sorry didn't watch the whole video - bedtime here) but one thing you can do is use the spoil board as your...
Openbuilds leadscrews are metric trapezoidal. See link below for earlier discussion. 8mm Lead Screw ACME vs Trapezoidal :D:D:D Alex.
Fine dust is the real danger - look for a dust extractor that will filter down to 0.5 micron and check out the cost of replacement filters. I...
I wasn't suggesting you shouldn't go for that one - controlling dust is more important than noise. Dust is life shortening, noise damages hearing...
Too true! I haven't found an effective dust extractor that wasn't noisier than my router. Alex.
Just seen this post in the Facebook group I mentioned - also mentions noise. The WorkBee CNC Group Public Group | Facebook Alex.
Please be patient @Eyesaw, if you want to reach more people try posting here The WorkBee CNC Group Public Group | Facebook as well. Alex.
Did you mean to post a link to the dust extractor @Eyesaw? Alex.
In Fusion you have set a clearance height of 10mm from the retract height of 5 mm (from stock top) so the g-code has a total height above the...
M01 is optional stop. Not sure how grbl or OB control responds to it but you probably need M0. Alex. Edit; I'll have to type faster! LOL.
