Separate names with a comma.
Some features disabled for guests. Register Today.
I've set mine so that the bottom of the collet nut is a fraction below the bottom of the Z axis. It could probably go a bit higher - basically you...
Very good! (sign) You can get the bits you need from screwfix - plug, length of 3 core 5amp flex, a 3 terminal connector - take the plug off the...
Hi @Matt Simon, the symptoms you describe sound exactly like there is an intermittent connection problem with one wire on your X axis stepper. The...
I cut my IT teeth on a Sinclair ZX81 followed by a commodore pet (with a disc drive!) I loved MSdos, especially all the things you could do with...
Hi Colin, will the mains lead from your power supply reach to the front of your bench? If so, move your double socket to the left side and switch...
Yes Colin - I used to be a design and technology teacher - some of my A level students would build robots as their major project, so I am familiar...
I think Colin and I have got this sorted now @GrayUK thanks. There appears to be a problem with the connectors on the duet controller and the...
Hi Colin, really pleased that the major problems have been sorted - have you let Oozenest know about your wiring problems? They are not going to...
Colin, when you have unticked the setting "allow moves without homing" (and saved settings) you will have to home all axes whenever you switch on...
Congratulations Colin!!!, but all that shouldn't have been necessary. Alex.:thumbsup::thumbsup::thumbsup:
Hi @Stan Howe, there are two ways of mounting the spoiler board on the workbee from Ooznest - the high setting Colin has used (better rigidity in...
Unless you had your wheels very tight to the rails I doubt if they would cause enough drag to cause your problems. Are your belts properly...
Hi Colin, Z axis is almost certainly one wire not connecting to the duet. That was the problem I had with my Y axis - one wire not connecting =...
Hi Colin, how is it going this morning? Alex.
