Separate names with a comma.
Some features disabled for guests. Register Today.
At the moment I am using paper, but I intend to make myself an X/Y/Z zero gauge - there is a video of how to do it on Ooznest's U Tube channel....
No problem with running your machine from wherever is convenient. Home is hardwired to back right, but workpiece zero is where you set it, usually...
Glad to hear it. Alex :duh::duh::duh:
Thanks sharmstr, it's late here and I couldn't remember how I did it. Alex. :confused:
Go to Oozenest, search for fusion 360 post processor, go to workbee firmware updates, download latest version of fusion 360 post processor. Can't...
Also have you disabled "allow moves without homing" and homed all axes when you switched the machine on. How familiar are you with fusion 360? It...
I am using fusion 360 with the post processor written by Oozenest and have no problems. Which post processor are you using? Alex.
Well done on the YAT install. Alex
Welcome Roger! You have joined the most supportive community so don't hesitate to shout out if you get stuck - and we are all learning so do pass...
You can certainly spin the machine, it just gets heavier as you build it. :D When you are checking the machine is square it can be useful to...
Two things: once you have everything running you need to change a setting in the Duet Web Control. My machine is not running at the moment but...
Pity, you don't need YAT to set up the ethernet version. Alex.
Which version of the Duet do you have? Alex.
Oozenest learning portal is running - apparently some users did have problems with YAT and Win8, but they were it would not connect to Duet, not...
Not sure what the problem is there Colin - I'm using a machine running Win7! Alex.
Another thought - the wheels are going to "bed in" eventually and you will have to adjust the eccentrics - from below!:cry: Alex
Why are you not using the Duet Web Control? Have you downloaded and installed the latest version of the firmware? I have no experience of...
Your problems with the flexible coupler are a bit of a red herring - it is being damaged by problems elsewhere rather than being the cause of your...
Alex Chambers submitted a new resource: Support Bracket for Dust Extractor - Attaches 32 mm tube to OpenBuilds router mount Inspired by...
Inspired by MetalGuru's Cheap and dirty dust collector, this is a bracket which bolts to the side of the OpenBuilds router mount and holds a 32mm...
