Separate names with a comma.
Some features disabled for guests. Register Today.
I have the 1010 workbee with duet controller. Homing works perfectly, but when jogging towards an axis limit switch the switch has no effect. I...
Done
For those (like me) who cant multiply by 25.4 in their head I have modified the speeds and feeds chart from Carbide to include metric as well as...
I have one for my saw bench/planer-thicknessor/spindle moulder, but they are not usually very good with fine dust. I may rig up something with a...
Well you could Colin...... all I have done with mine is clamp a bit of 2" x 1" to the edge of my bench, screw a large cup hook into the top and...
For those (like me) who can't multiply by 25.4 in their heads I have modified the Carbide chart to include metric - I have assumed plunge in the...
The router power cable (and dust extraction) need to be supported above the machine roughly in the middle of the cutting area with enough slack to...
Anyone starting with Fusion 360 might find these links useful. Solved: PDF User Manual for Fusion 360 [Ultimate] - Autodesk Community CAD Forum...
Hi Colin, have you got your machine yet? Did you want some of the greenhouse clips I used to hold my x axis limit switch wire in place? Alex.
Hi Colin, I have done very little with my machine yet, but one of the first things I did was to use a fine engraving bit to scribe parallel lines...
Hi Kotya, distributor in the UK is Ooznest. Regards Alex
There really weren't any major problems - just some things it's better to check before putting everything together. The kit from Oozenest went...
Before you start on your workbee check out some other builds for snags some of us have come across. (eg workbee with duet controller - full...
There is another version of those "D nuts" (usually called threaded inserts) without the flange. I use them on my spoiler board because they can...
Not a part you need to machine - I found that clips intended for aluminium greenhouse frames would fit V-slot with a little trimming - you should...
I have had exactly the same problem using a router by hand - the vibration caused by the flutes hitting the workpiece results in wear to the...
PS the faulty crimp was actually broken in half - one part still attached to the wire, the other still in the plastic receptacle. Alex.
Thanks Ryan, the problem with the stepper motor connectors was twofold - the plastic part of the headers on the Duet are flimsy and on at least...
Alex Chambers published a new build: Workbee 1010 with Duet controller from Ooznest Read more about this build...
