Separate names with a comma.
Some features disabled for guests. Register Today.
But still, why would you need to, your symptoms doesn't point at a controller problem, see my reply above?
Please contact the store for assistance: Submit a ticket thanks
44=4 = z first, then 45=3 = 1+2 at the same time = xy at same time. and Was what I was hoping to check on next, if it wasnt - probably loose...
Visually, does it clear the switch? Does it move 10mm away from trigger point (measure)
5mm is a bit too little for typical lever switches, thats why we use 10mm. But try 6, 7, 8, 9 etc until it clears all switches reliably
Check https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration#27---homing-pull-off-mm (We do 10mm usually)
With the OX and other earlier generation plates folks often overtightened eccentrics, flattening/cracking wheels. So we moved it outward just a...
Do you mean laser mode? Either include the $32 commands in your CAM setups GCode Header ($32=0 in router jobs and $32=1 for laser jobs) so its...
Sounds like the symptoms when only 3 of the 4 motor wires has contact throughout - probably just a break inside a cable at a strain point (inside...
Just scroll up, he posted it:
Then consider a CO2 laser, UV is not absorbed by resin (wrong wavelength). IR from Co2 laser will do much better through the plywoods resin glue...
1) Slow it down a little more 2) Add another couple passes 3) Experiment with focussing on the center of the material thickness 4) Install a Z...
"OpenBuilds CONTROL" is our CNC host application for our machines that use our controllers: docs:blackbox-x32:start [OpenBuilds Documentation]...
Then please contact them for support, their controllers will not work with our software.
All support is conducted via Support > New ticket - you'd have a response in minutes usually (in business hours)
LEAD? Workbee? 1515 is just the size? Which machine? From where (OpenBuilds or 3rd party?) Which controller do you have on it? Then what DO you...
Which machine, from where did you purchase? (We don't have a "1500" at this time so trying to determine what you have, what machine, what...
Nice, good check! Did you try a different USB cable?
Either docs:blackbox-4x:iot-and-laser [OpenBuilds Documentation] or simply control which device is powered on (router off for laser jobs and vice...
Sounds all the more like a chip. Here to hoping there was no damage, just a temporary short, glad its working again! Regular visual inspection...
