Separate names with a comma.
Some features disabled for guests. Register Today.
Thats out the norm, do a little online research on VFDs and EMI. Usually doesn't go far as faraday cages (: - proper earthing, and shielding of...
Can give it a shot, but with EMI, its always better to fix the "where its coming from" than "the thing being affected by the EMI" - if you have a...
Wifi is not used during the job. Interface connects to BlackBox using a cable They can be trouble. Using shielded cable for the 400hz 3-pbase...
Are you sure its a compatible relay module? Might already be damaged from your readings, but how to measure that correctly is hard, so i am...
On VFDs the inputs like ACM is isolated from AC GND, so probably not via the ACM port Workaround fine, but there is still a short somewhere, i'd...
Unlikely, looks more like a computer problem at the moment, though that might be a little cold and cause condensation issues too, so can't rule it...
1) Out of date [ATTACH] V1.0.376 is from March last year, should be on 1.0.388 by now 2) When it says wait for Idle, controller is still in...
We don't really use FluidNC much (more grbl/grblHAL) but checkout Macros
Not really telling much, if you'd like us to help, we'd need the full picture. One line on its own is a lot less telling than taking the full log,...
You'd have to create a pinmap etc, lot of work - and then likely some incompatibilities with existing software toolchains etc. Just can't think...
Not easily no (a lot of work, you can use the gcode editor tab and comment out all the M3 start commands in the job), A power switch for the...
Other checks: 1) Try a different PC 2) Make sure you are on CONTROL v1.0.388 3) Have you rebooted the PC as well 4) Cropped screenshot hard to...
Quite an old build (2018) you might want to refer to the CoreXY sections of any more modern firmware (Marlin/Klipper etc)'s documentation these...
Have you tried rebooting the controller? (Press RESET on front panel) - seems to be unresponsive, possibly stuck in some non idle state There are...
BlackBox does not work with Torch Height Controllers, no. Use a floating head like our OpenBuilds LEAD Plasma uses
Yes check log, and provide gcode file for review too, but does sound like EMI possibly
What shuts down? BlackBox? If so, log extract on Serial Terminal/Log tab will show if port shutdown by EMI
No schematics, but all pins broken out to terminals already. See https://github.com/grblHAL/ESP32/tree/master/main/boards for the BlackBox X32...
So it wasn't the plasma, but some other wiring that caused a short or some other mistake. Problems as soon as you added that wiring. BlackBox X32...
Mainly depends on the VFD. The relays are modular in nature, wire up what the VFD needs. The VFD manual should tell you what to do for the...
