Separate names with a comma.
Some features disabled for guests. Register Today.
Correct. Fusion and Deskproto are our 4 axes recommendations Would work yes. Just use...
What machine/controller are you running? If its not a grbl/grblHAL based controller it won't work with the newer stuff. V1.0.136 is suuuuper old...
Hasn't been any new Grbl releases since 2019 so nothing newer to update to Proving that Grbl and a well implemented Grbl compatible host works...
We will have to ask @terjeio if that can be added to Web Builder.
Regardless, please do the test, so we eliminate other non-PC causes from the test. If it also fails on the other one --- then its NOT that laptop...
Its in G53 (lifts up to couple mm short of Z homing switch, switch trigger point is 0, machine itself is all negative quadrant. Read Frequently...
Well please do, just a comparison test to see - should work. Your CONTROL is up to date right (v1. 0.388)
Your post processor is a little outdated (should be on v1.42) but should load as gcode. So next question tried a different PC yet?
Where is the gcode from? (What CAM application, sure its the correct post/dialect?) Please provide a gcode file for review
Looks like loose setscrews on the pulley - causing pulley to slip on motor shaft Not a LEAD1010 though - LEAD machines have Leadscrews (:
Along X is the more standard (most CAMs will output X+A (and Z) moves for lathe type toolpaths). Our fusion Post is proper 4-axes (XYZA), David...
You can skip V+ but do note that the onboard filtering and LED needs power, so if you can, best to rewire. Otherwise they will work, but you have...
First, use the Tool On/Off menu to test (perhaps the gcode is missing the S parameter or not including M3/5)
At the time the alarm comes up, is the machine touching any switches? If not, it could be a false trigger caused by EMI. Do you have a dust...
Per 4 Axis CNC Machining: The Definitive Guide (arrows = positive directions) [IMG]
During assembly, getting the uprights square on the Y carriages is the one you probably didn't do perfectly. Carriages are always square to Y...
Yeah some disassembly required. Easier to do while building, afterwards some fasteners are behind other parts
See Tramming: A generic guideline
See OpenBuilds Actuator Test Rig https://builds.openbuilds.com/uploadfiles/Part%20Specs/OpenBuilds%c2%ae%20Actuator%20Tests_V2.pdf Strength...
That would be G10 G-Codes Jog to a position you want as X150/Z13 then issue a G10 L20 X150 Z13 Or G10 P0 .... where P0-6 = coordinate systems....
