Separate names with a comma.
Some features disabled for guests. Register Today.
Yes the post processor includes G20/21 to tell the controller what the Gcode that follows is in $376=1 to designate A axis as Rotary is about...
See docs:blackbox-x32:connect-vfd [OpenBuilds Documentation]
Checkout other similar discussions =38"]Search Results for Query: xtool | OpenBuilds Mainly all laser modules has a power input, and a PWM input....
No experience with any, but might be 2x as much and 1/2 as slow (: But still, not too hard to find a neighbour with a printer Just watch out -...
If you find a good set of 3D printed parts, can always use 3D Printing Service | FDM, SLA, MJF, SLS & DMLS | Plastic and Metal Parts - PCBWay to...
Try a different PC, make sure you have drivers from the BlackBox docs page. Its not typical, more of a PC problem
[ATTACH]
There is a rewritten comms section in the next CONTROL update (not out yet but very soon) which may help
Inductives themselves don't react well to series/parallel wiring (active devices, does more than just a simple switch) so usually not easy to do...
When it stops, does it stop temporarily (acceleration or max rate set too high, or mechanical slippage/binding, or intermittent loose connection...
Thanks will check it out
That's not ethernet (8 pin RJ45) that's a UART on a 6 pin RJ12 https://docs.openbuilds.com/doku.php?id=docs:blackbox-x32:aux-serial Its actually...
Might be best to ask here https://github.com/grblHAL/core/issues
Yeah thats perfect, (sadly) not the cause - so still looks like PSU is the more likely cause :(
It can, though i was hoping with you for a more clear issue like a dead short in wiring somewhere, always sad when there is damage, but a relief...
Optlaser's good, so not likely to be cause. Weho's are little less filtered than the Meanwells so I would advise considering to upgrade to a...
There are testing steps in Main thing would be first to find what damaged it if its dead. Before a replacement gets damaged as well. Using our...
Will have to check the docs again, but perhaps its 0 instead of -1 that disables it.
I notice a diy RJ12 cable. Longer than ours or less shielded or similar? Interface errors look more like Serial corruption, and is likely just the...
Set A-axis Max Travel to "-1" to allow it unrestricted rotation. Normally only positive moves are in the machine envelope, to use negative spin...
