Separate names with a comma.
Some features disabled for guests. Register Today.
docs:software:lightburn [OpenBuilds Documentation] Port number is not controlled by CONTROL. You OS aasigns port numbers, just use the correct one
Thats quite old, sure you have a Grbl 1.1f or later based controller?
Try 5000 as a test too. 1khz should be good, but try 5000 as well Double check CAM workflow does add S1000 for 100% job to gcode file. Focussed...
Not related to CONTROL update (if in doubt, review OpenBuilds-CONTROL/CHANGELOG.txt at master · OpenBuilds/OpenBuilds-CONTROL ) But to show...
Supposed to be 1000 for most CAMs (Ours, LightBURN etc) Maybe other settings wrong too. Post a Grbl Settings backup for review
Don't sweat it happens often enough that "Do you have an IoT" is one of the first questions we ask for anything that stops moving when a Job...
Any chance your 24V PSU is plugged into one of the other ports on the IoT by mistake instead of the wall socket?
Pictures of all wiring for review please? If it power cycles when the laser should turn on it could be an incorrectly wired something related to...
You can yes.. But if you need a brake, why? Is it a super heavy Z axis? If so. Maybe brake is the wrong solution (and hard to integrate) What's...
Yes, still the same functional setup as before. Interface is always going to be a "PC Replacement" Eventually but not being worked on yet. You...
Not stored anywhere no. Its just relevant to whats going on at the moment after all. Why would you need it? If you provide more details we might...
Incorrect S-Value VS $30 setting can cause differences in power, are you testing from the Tool On/Off buttons?
COM3 was added. Was that when you plugged in BlackBox? 6 and 7 was present in both events Later you try to connect to COM6 Sure its not COM3?...
1) Make sure you have Laser Mode enabled 2) use the tool on buttons in CONTROL to test (eliminate CAM issues like wrong commands / wrong s-values)...
1) check mechanicals (for example grubscrews on shaft couplers tight? Machine Trammed Tramming: A generic guideline, etc) 2) Then calibrate...
Is the QR code itself not showing? Skip the QR and just type the IP of your PC into the browser http://computer'sipaddresshere:3000/jog on the...
1.5kw air cooled 65mm spindles fits the same mount. 2.2kw is quite overkill: How to calculate V-Slot® deflection - frame will flex long before you...
If you are building our kit, best to watch the whole video. I don't have an exact timestamp as its part of the complete assembly, at different...
Incorrect Grbl Settings, mostly $4 set incorrectly. But likely others too (if it forgot one, it forgot them all - causes for EEPROM corruption...
Please contact the vendor you purchased from support If its unable to be revived and you need a new controller, consider a BlackBox Motion...
