Separate names with a comma.
Some features disabled for guests. Register Today.
Sounds like the symptoms in first section of docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] (along with lack of torque,...
Yes, Xtension Limit Switch Kit - onboard filtering, no shielding needed when used with a proper controller like a BlackBox Motion Control System...
1) make it jog correctly in $3 Direction Invert. Z+ should lift Z up and away from the spoilboard [ATTACH] 2) In $23 Homing dir, tell "where...
Also not related. Jog+Setzero or probe setting zero = same thing. Work coordinates. If you don't have homing switches get some. Fake the home...
Fix that first. Homing required, implies a succesful homing run. It has to he HOMED (not just tried to home) $44=4 ; z first $45=3 ; then xy
Exactly that, step by step. Open CONTROL. Go to Grbl Settings tab > Scroll down to $3 Direction Invert. Flip switches as needed to fix any axes...
Switch is used for touchoff on a floating head. So technically yes you do need it. Watch the LEAD 1010 plasma assembly videos to see the floating...
Grab a CNC Electronics Bundle Far superior! See https://docs.openbuilds.com/blackbox-x32 and https://docs.openbuilds.com/Interface
Please continue with the store (reply to your existing support ticket) thanks. No none of that is normal, and with both replaced, even weirder....
All the extra shielding/earthing might be messing with it.. Wire it as shows in the docs. Nothing extra Shielding can cause more problems than it...
CONTROL > Grbl Settings > $3 Direction Invert. Flio switches to opposite of what it is now for any axis going wrong. Assuming all the other...
Restore your last good backup. CONTROL > Grbl Settings tab > Restore Backup button on main toolbar > pick that backup file you saved when all was...
CONTROL > Grbl Settings > Scroll down to Max Travel Grbl v1.1 Configuration Grbl Wiki a must-read
You can use Soft Limits (that will jog to just shy of the Home -> Max Travel rectangles extents) - remember to home to establish the coordinate...
Set $44=3 and $45=0 in Grbl Settings It's a 'mask' where X=1, Y=2 and Z=4 (or combination thereof) So the default of $44=4 (does Z first) then...
Ours are Normally open, no way to change.
Refer your controller's manual. V+ = power for signal pullup and filtering circuitry GND = Ground SIG = the endstop signal (Goes LOW [GND] when...
Nothing on the plans, no real need for it with a nicely built machine with a floating head like our OpenBuilds LEAD Plasma THC is more for...
Your thread title states "Blackbox x32 pwm" The PWM port is a 3.3v logic signal yes (See docs:blackbox-x32:layout [OpenBuilds Documentation]...
1) Power on: Does fan spin, does LEDs light up on front 2) Can you still connect over USB 3) If you can connect, do functional tests with a known...
