Separate names with a comma.
Some features disabled for guests. Register Today.
Use the cable tie slots provided on the back panel, couple slots near every cable input, allows you to cable tie the cable for a little extra...
No public schematic available at this time. PSU related damage would likely have extensive damage (regulators, stepper drivers, microcontrollers...
In parallel, you are sharing the driver, so you are compromising on available power. Still under warranty? Or an old controller (If so, consider...
That's what the Prepend/Append blocks are for, add your M3Sxxx where xxx = RPM (or 1000 if its a IoT+Router setup) commands for on and M5 for off,...
Haven't used FlatCAM in a while, does it allow you to pick a gcode flavour/post processor/firmware type anywhere in its settings (Make sure it...
Teensy soft USB is troublesome with current CONTROL versions. Use IoSender
Openbuildspartstore.com > pick up a LEAD machine. Most modular, strongest, bestest machine we have. Will do router, laser, plasma, whatever. We...
Sounds like you aren't homing or homing but incorrectly. Or not using our Post as you should?
Youtube: Watch out for the "reviews" by the laser module sponsors, and add grains of salt accordingly CO2 is the one most proper machines use,...
60w to 80w CO2 Laser territory, UV lasers (diode) don't so so well in plywood. UV absorbs into organics. Resin layers in ply are inorganic,...
Opticals are logic devices, so you'd possibly need to add couple logic gates to avoid them interfering with each other. Best to direct that...
More fonts: See post #8 above or even better, learn to CAD outside your CAM: docs:software:overview [OpenBuilds Documentation] Pocket operations...
docs:software:file-errors [OpenBuilds Documentation] most likely, invalid children objects inside the SVG. Give it nice clean Path data to work...
Our profiles are just templates that populate the grbl settings form below for our machines. Read the fine print for each section. If your...
Do make sure you have $4=0 on the old one - pretty sure spinning motors by drill would have generated enough backfeed voltage to kill the drivers,...
English only please, see section 15 of the terms you agreed to during registration: Terms of Service and Rules | OpenBuilds
Did you have a backup off the old setup? If so, simply go to CONTROL > Connect to the X32 > Grbl Settings tab > Restore backup > Select the old...
Leave everything else just set SSID and Password. See docs:blackbox-x32:wifi_setup [OpenBuilds Documentation]
making it easy to reverse live/neutral, try plugging it in 180deg from current orientation
Then laptop PSU might have a short. Try on battery only. Try flipping 2-pin plug on laptop PSU in socket (Neutral Earth bonds exists, if plugged...
