Separate names with a comma.
Some features disabled for guests. Register Today.
Spindle should be EARTHED DC GND should be a seperate domain Having a short between the two (thats supposed to be isolated from each other -...
Some GND to AC Earth short in your system that went unnoticed till your add an earthed spindle. Process of elimination to find it, then remove the...
Yes, thats how its been done for ages (grbl 1.1 implemented that scheme back in 2016-7ish already nothing new)
Y2 Switch is in parallel to Z (Can't parallel with Y else it won't know which Y was hit) - since Y moves on its own, if it sees Z trigger while Y...
You can do a standard probe on the front/left corner and enter stock dimensions quite easily to do center origin CONTROL > Probing Wizard > XYZ...
Truth be told they never really did. Check in with the grblhal repo for the driver for support grblHAL, but honestly, dumping the board and...
... Spend the couple bucks and get some (:
Cam > Settings > tell it what toolhead you have
BlackBox with CONTROL will do that just fine. See https://docs.openbuilds.com/blackbox-x32 Recovering origin is as simple as rehoming. All other...
TLDR version: 1) Always Home then 2) set Zero by probing or using jog and setzero and then 3) run the job All the trouble starts when one forgets...
docs:software:lightburn [OpenBuilds Documentation] You can set the origin in the configuration to match where your machine.
Checkout docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Would still happen if its overcurrent, read the link I shared - multiple causes for fault, not just heat... Turn it down a bit
Do the test first before we jump ahead. Switch to incremental jog, do a test jog (say 100mm) and see if it lines up. Its a question, not a...
If the correct probe is selected, its sending a move like (from your screenshot) and going further: [ATTACH] Then your calibration must be off
See docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] Keep an eye out, does the Fault LED for that axis light up when it stops...
As close as you feel comfortable. it only triggers once pressed, so 1-10mm whatever you are happy with.
And if you are jogging does the machine follow the correct distances and directions? If so, wrong machine profile, did you maybe change some...
Do you have the correct probe selected under Probe Type on the wizard in CONTROL?
1) Are you wired up to a compatible controller like a docs:blackbox-x32:start [OpenBuilds Documentation] 2) If not, check in with your machine...
