Separate names with a comma.
Some features disabled for guests. Register Today.
Why? See Yours is already different from the the example, so go with what I said later on (only - nothing extra, no relay1 anymore, you don't...
Along with Yes Its always been an option. On GOOD VFDs just not needed. Thus the mention, check with your vendor if they support the good...
So if they don't support 2 wire mode like the less cheap VFDs, then wire the relay as suggested above too
Refer your VFDs manual, or ask the VFD supplier to support their product Quick squint at the manual, around Page 59 - 2 wire mode...
For example [ATTACH]
Did you wire up Relay1 for enable and Relay2 for fwd/rev? (depending on VFD some require daisy chain through both relays)
[ATTACH] Wouldn't that offset the cut height?
Definately BlackBox Motion Control System X32 Macro example: Getting started with Javascript Macros in CONTROL / Library of Macros created by the...
Check your SPAM Folder as well
Happy to help: Look at the menu up top of the page: [ATTACH] Use the New Ticket option to create a support ticket for the store
We are a Company actually, so you might refer to OpenBuildsCONTROL (or just CONTROL) instead? CONTROL doesn't matter. We don't do anything except...
Oh X not A, sorry thought you'd have a newer X32 (which has A) - if its an old BlackBox 4X and you're wrapping about X, then it should be X-axis...
Firmware for 4X box and downward Note our support is available to our customers, as is support for our software. Contact JD for support for his...
Its an A-axis not a B-Axis
Play with the Enable DTR setting: Try it with and without [ATTACH]
I replied to you on the store, our add on does not allow another one of our clamps to be added. Not needed either. Did understand your question...
Thats quite unhelpful. Not sure how to proceed either - though I would want to suggest avoiding Vectric then and thinking about Fusion (Post...
Thats what CONTROL and Interface needs to work - we expect certain fields in the response Use CONTROL > Grbl Settings > Select machine from list...
Not done in config.h though, set that in $22, refer Additional or extended settings
Correct, you'd need to setup your own environment for any changes not covered in Web Builder
