Separate names with a comma.
Some features disabled for guests. Register Today.
1) Make sure your CONTROL is up to date (You posted in a thread about V1.0.276 from Jan 2021 - over 3 years and exactly 100 versions behind...
During a move, or during as a test? Might be the testing method? (Testing while idle vs while moving etc) No, as I said: They should work. Only...
Can shim if you want, but carriage is constrained by the wheels, leadscrew just provides motion along one axis, and if the lock collars are tight...
Using our recommended PSU will protect your warranty. Cheap PSUs can cause surges, EMI issues and damage. Might be best to resell the machine in...
Not really sure. I'd say try it and see or overspec. Just make sure overspec'ing doesn't have too many disadvantages like making it fit with the...
Bearing is pushed tight into endmount by the lock collars. If loose, reset your lock collars to prevent any axial play. A little radial play...
Did you start it? If its not running yet... Also is yours up to date. Can your PC do DNS lookups? Internet up? Etc. Or skip the one click...
Alarm might not always be raised during testing (if still in earlier alarmed state won't popup again. Clear first), but if they test fine by hand,...
Only one real way : up close inspection, if needed partial teardown. Sense of touch can feel minute relative movements, smaller than the eye can...
Not sure what you mean, CONTROL is still active, last release just last week. Should be on V1.0.375 download from software.openbuilds.com
Xtensions Limits or something else?
The "version" check is for Smoothieware. It first tries autoreset then soft reset then effectively gives up trying to find a Grbl controller, and...
If you don't have a probe, then don't enable Touch off in the Toolpath options. Do watch the video though and learn the proper ways. Or even...
Probably Probe Not Z Axis? Do you have a touch off probe switch and floating torch mount? If not watch [MEDIA]
LibUSB isn't our driver, so prior to the BlackBox you had some similar device that used that driver. Proceed to uninstall LibUSB then reinstall...
Checkout our flagship, the LEAD1010 Machines - LEAD Machine - LEAD CNC Machine 1010 - OpenBuilds Part Store We have EU distributors too - check...
NEMA17, one of these Nut Plate for 8mm Metric Acme Lead Screw on a short piece of 2040, and a couple Mini V-Wheels? Similar to ACRO 1010 with...
Using AutoSquaring under http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 > Y-Axis dropdown > Auto Squared X switch wires to X...
Exporting CAD as DXF (R14 Polyline) will do docs:software:file-errors [OpenBuilds Documentation] Some CADs try to be too fancy, but you can always...
