Separate names with a comma.
Some features disabled for guests. Register Today.
It looks like one of these. McMaster-Carr Here are others if that is not right. McMaster-Carr
Did the microstepping get changed somehow?
What finish did you use? It looks beautiful.
You need GRBL not the longmill version, and you need to read the grbl wiki. It will tell you how to hook everything up and also that your cnc...
I use a black box and Estlcam and mine is right on. Do you use Estlcam as the controller or just to generate gcode? I calibrated mine using a...
Have you checked your wiring to see if maybe there is a loose connection or a short? Maybe when the wire is bent in a position other than how it...
since it is too close to the left and bottom, it is -- as Shawn mentioned above -- most likely that you input the wrong diameter tool for probing....
I put in T-slot on mine then put 3/4" particle board strips (76mm wide) between the T-track. I used that 76mm dimension because it divided into...
I did something similar to add additional supports. I cut particle board scraps roughly the width of the 2040, mounted those pieces to the 2040,...
I run everything on dark mode. So much easier on the eyes.
Much easier. Thanks. This is why I get on this site every day that I can.
This is a great idea, and prodded me to think of a simple way to do it with Vcarve. To mimic this, just split the model into smaller pieces with...
In the resources section are several versions. STEP STEP Parts Library Grab cad OpenBuilds GrabCAD Library - ONLINE
I would think you just need to buy the "high z mod" but let customer support know you want a 1500 mm beam instead of 1000mm.
My work around is to cut one part, then jog a known distance in either x or y (ex. 100 mm) to where I want to cut the second, then reset WCS xy...
That is brilliant. I have been using aluminum tape with an alligator clip which is kind of wasteful.
Unfortunately I do not know more about the spindle. If it were me, and the CNC x axis gantry could support a little more weight and torque, I...
My guess is you will need a DC spindle controller. Here is an example of one that popped up when I googled it: Amazon.com . It appears to accept...
If you have not done so yet, under "Setup" select "CNC programs/ post processors, then select "Presets" and choose grbl. [ATTACH]
If you are talking about this, [ATTACH] I checked his Thingiverse account and was unable to find it there. It is strange it was not added in...
