Separate names with a comma.
Some features disabled for guests. Register Today.
This is how i did it and using V carve and the post processor I use, you can care asymptomatic objects like busts and figures. LEAD Lathe
The Makita is the same size. But you may need to buy additional collets.
Are you using the OpenBuilds Grbl post processor for Vectric? docs:software:vectric [OpenBuilds Documentation] Are you homing the machine before...
It should all be in the documentation. I believe there are larger pics for each thing you hook up in the he instructions. docs:blackbox-x32:start...
Is the router itself turned on? That is the one thing I do not see you mentioning. Are you attempting to turn it on with the tool on/off in...
I had not thought to try it that way. Thanks for the information.
Check your spam box. Sometimes they end up there. OpenBuilds has great customer service so I bet that is what happened.
If it is something flat like a wrench, I like to trace it on 1/4" graph paper. Then it is easy to scale.
I have 1.0.1 I do not know if this helps. [ATTACH]
I will check when I get home. What I find helpful, is to take a measurement -- I usually use the over all length-- then take a picture from...
In inkscape, I bet if you remove the "fill" after you did a "Trace Bitmap" on your drawing you will find your ink line is two parallel lines. If...
Although it should be greater than 1/10th, is there a way that things got switched from inches to mm?
You can look through this: Swing Arm And here is another customs build with a well documented dust collection system. Portable self-contained...
I was able to go to that link I posted, add one to my cart and proceed to the checkout. I did not follow through with a purchase though because I...
Kodiak Cutting Tools has some extended reach endmills. They are what I used when I needed longer length endmills. Here are two, but there are...
Sometimes if the wires are not put into the connectors properly, they can make an intermittent contact. Sometimes the screw holding them in can...
I am curious if you can connect with the Arduino IDE and flash it with grbl via that.
Calibrate over the longest length (1000 mm if possible) you can using a very "pointy" endmill so you can more accurately see the distance or...
Do you have a short/loose wire in one of your Y axis motors? Shorts will cause the motor to not keep up and shorts it the wiring can also damage...
How did you find and set your XY zero point? Did you use a probe? Did you remember to put the right diameter of endmill in for your probing...
