Separate names with a comma.
Some features disabled for guests. Register Today.
I solved it by setting it up as a LEAD 1010 then reflashed the firmware using the tools and wizards. Now it all works as expected.
I spoke too soon. It works in 2 axis laser mode. When I changed it back to a Lead, it only homes the X and Y.
Apparently when I chose Acro 1515 the Firmware flash tool reset the $5 value to disable. It now works.
Yeah, but then you have to drill a bunch of really well aligned holes. I was too lazy.
Ha! Then either he wrote the Hawkridge post processor, or the "fruits of his labor" was him claiming as his own. Sorry that did not help you...
I should add that I will measure each endmill a couple times to be sure I didn't drink too much coffee and shaky hands gave me an inaccurate...
@justjoshin590 Scroll all the way to the top of this page and click on the "Parts List" tab. All OpenBuilds Machines have this list on their...
You only locate X and Y one time. That will not change on your work piece. Each time you change tools, you must re-zero the Z position. I would...
You could maybe try this persons Solidworks Post Processor for GRBL. I have never tried it myself because I went with the free Fusion 360, but it...
I have never done it, but I have milled many custom plates out of aluminum. It would be relatively easy. My new Sharkbits 1/4" 3 flute was...
I am pretty sure I did when I chose the acro setup. When I first tested, I was using 3 axis an three switches and I depressed the z first. I...
I went with the first option. But mine are 15s not 20s. It is the least amount of work and I found that the M4 drop in T-nuts centered the rail...
I almost hate to ask about this because it is probably something simple. I currently have a CNC router that I built in 2016 which uses an Aduino...
From the Workbee webpage: [ATTACH] The standard is that the machine homes in the back to move the cutter and gantry out of the way so you can...
I did that with my lathe I built out of a cbeam linear actuator and the High Z mod kit. I put a joining plate on the back side to keep the upper...
Reach out to the Parts store and they will help you out (support.openbuilds.com). As for a temporary fix, I am not sure which M5 bolts you are...
I am too lazy to remove my router. Although, Santa just brought me a new RoutER11, so I may have to try it. ;)
I definitely was not referring to TB6600 when I said "reliable" since a significant percentage of the time they are not real TB6600 drivers that...
I am also confused. You used more than one tool path and more than one endmill? I assume so since you mention both a down-cut and "V carving."...
An Arduino uno ($20) plus 4 reliable DQ542ma stepper driver's ($38.99 each) are almost the cost of a black box. Then you need to figure out how to...
